5 MAIN BEARING ENGINE (18GB & FUTURE) 1964 ON
unillustrated articles
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
2 | 12H2521 | PISTON SET, ENGINE SET, HIGH COMPRESSION, STANDARD |
1 | 18GB-GG 8.75:1 CR 1964-1970 - 4 rings - high compression (use with Con Rod 12H1019 or 12H2444) | CHF 224.40 | |
2 | 12H2521/20 | PISTON SET, ENGINE SET, HIGH COMPRESSION, +0.020" |
1 | + 0,020" - 18GB-GG 8.75:1 CR 1964-1970 - 4 rings - high compression (use with Con Rod 12H1019 or 12H2444) | CHF 224.40 | |
2 | 12H2521/30 | PISTON SET, ENGINE SET, HIGH COMPRESSION, +0.030" |
1 | + 0,030" - 18GB-GG 8.75:1 CR 1964-1970 - 4 rings - high compression (use with Con Rod 12H1019 or 12H2444) | CHF 224.40 | |
2 | 12H2521/40 | PISTON SET, ENGINE SET, HIGH COMPRESSION, +0.040" |
1 | + 0,040" - 18GB-GG 8.75:1 CR 1964-1970 - 4 rings - high compression (use with Con Rod 12H1019 or 12H2444) | CHF 224.40 | |
2 | 12H2521/60 | PISTON SET, ENGINE SET, HIGH COMPRESSION, +0.060" |
1 | + 0,060" - 18GB-GG 8.75:1 CR 1964-1970 - 4 rings - high compression (use with Con Rod 12H1019 or 12H2444) | CHF 224.40 | |
2 | 12H5163 | PISTON SET LOW COMPRESSION STD |
1 | standard - 18V on 8.0:1 CR 1970 on - 3 rings - low compression (use with Con Rod 12H3596E) | CHF 212.10 | |
2 | 12H5163/20 | PISTON SET LOW COMPRESSION +0.020" |
1 | + 0,020" - 18V on 8.0:1 CR 1970 on - 3 rings - low compression (use with Con Rod 12H3596E) | CHF 212.10 | |
2 | 12H5163/30 | PISTON SET LOW COMPRESSION +0.030" |
1 | + 0,030" - 18V on 8.0:1 CR 1970 on - 3 rings - low compression (use with Con Rod 12H3596E) | CHF 212.10 | |
2 | 12H5163/40 | PISTON SET LOW COMPRESSION, +0.040" |
1 | + 0,040" - 18V on 8.0:1 CR 1970 on - 3 rings - low compression (use with Con Rod 12H3596E) | CHF 212.10 | |
2 | 12H5163H/STD | PISTON SET HIGH COMPRESSION STD |
1 | standard - 18V on 8.75:1 CR 1970 on - 3 rings - high compression (use with Con Rod 12H3596E) | CHF 205.90 | |
2 | 12H5163H/20 | PISTON SET HIGH COMPRESSION +0.020" |
1 | + 0,020" - 18V on 8.75:1 CR 1970 on - 3 rings - high compression (use with Con Rod 12H3596E) | CHF 205.90 | |
2 | 12H5163H/30 | PISTON SET HIGH COMPRESSION +0.030" |
1 | + 0,030" - 18V on 8.75:1 CR 1970 on - 3 rings - high compression (use with Con Rod 12H3596E) | CHF 205.90 | |
2 | 12H5163H/40 | PISTON SET HIGH COMPRESSION +0.040" |
1 | + 0,040" - 18V on 8.75:1 CR 1970 on - 3 rings - high compression (use with Con Rod 12H3596E) | CHF 205.90 | |
2 | 12H5163H/60 | PISTON SET HIGH COMPRESSION +0.060" |
1 | + 0,060" - 18V on 8.75:1 CR 1970 on - 3 rings - high compression (use with Con Rod 12H3596E) | CHF 205.90 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
3 | BHM1184 | RING SET MGB 64-70 4R |
1 | standard - 18GB-GG - use with pistons 2a (12H2521) - high compression - 1964-70 - 4 rings | CHF 99.40 | |
3 | BHM1184/20 | RING SET MGB 64-70 4R |
1 | + 0,020" - 18GB-GG - use with pistons 2a (12H2521) - high compression - 1964-70 - 4 rings | CHF 99.40 | |
3 | BHM1184/30 | RING SET MGB 64-70 4R |
1 | + 0,030" - 18GB-GG - use with pistons 2a (12H2521) - high compression - 1964-70 - 4 rings | CHF 99.40 | |
3 | BHM1184/40 | RING SET MGB 64-70 4R |
1 | + 0,040" - 18GB-GG - use with pistons 2a (12H2521) - high compression - 1964-70 - 4 rings | CHF 99.40 | |
3 | BHM1184/60 | RING SET +60 B 4R |
1 | + 0,060" - 18GB-GG - use with pistons 2a (12H2521) - high compression - 1964-70 - 4 rings | CHF 101.95 | |
3 | BHM1183 | RING SET MGB 18V STD |
1 | 18V | CHF 88.05 | |
3 | BHM1183/20 | RING SET MGB 18V +20 |
1 | 18V | CHF 88.05 | |
3 | BHM1183/30 | RING SET MGB 18V +30 |
1 | 18V | CHF 88.05 | |
3 | BHM1183/40 | RING SET MGB 18V +40 |
1 | 18V | CHF 88.05 | |
3 | BHM1183/60 | RING SET MGB 18V +60 |
1 | 18V | CHF 88.05 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
4 | 51K281 | STUD LONG CYLINDER HEAD |
4 | CHF 12.05 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
6 | 12H2178 | WASHER FLAT 3/4 OD |
11 | CHF 2.15 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
8 | 3H576 | DRAIN TAP ENGINE BLOCK |
1 | alternatives | CHF 43.40 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
9 | 53K2853 | PLUG-BLANKING |
1 | alternatives | CHF 22.15 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
10 | 2K4975 | WASHER FIBRE 1/2" ID |
1 | CHF 1.40 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
12 | BHM1212 | CAM BRG SET B SERIES |
1 | incl. 3 bearings | CHF 26.40 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
14 | 2A113 | GASKET, PUMP TO BLOCK |
1 | CHF 1.40 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
15 | GHF301 | WASHER 5/16 X 5/8 M8 |
2 | CHF 0.40 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
16 | GHF332 | WASHER SPRING 5/16 |
2 | CHF 0.25 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
17 | SH605041 | SCREW 5/16" UNF X 1/2" |
2 | CHF 1.20 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
19 | 53K2853 | PLUG-BLANKING |
1 | 18GB engines | CHF 22.15 | |
19 | 12H1715 | DRAIN PLUG NCA |
1 | 18GG on | availability request (add quantity to basket, offer follows) |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
20 | 12H865 | VALVE OIL PRESSURE RELIEF |
1 | CHF 12.55 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
21 | AEH798 | DISC O P R VALVE KMS |
1 | CHF 3.60 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
22 | 1H756 | SPRING, RELIEF VALVE |
1 | CHF 5.25 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
24 | 12A1851 | BLANKING PLUG |
1 | CHF 18.95 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
25 | 12H1638 | GASKET MAIN BEARING CAP, CORK |
2 | 2 required for rear | CHF 2.85 | |
25 | 12H1638 | GASKET MAIN BEARING CAP, CORK |
1 | 1 required for front - to 18GG 1964-71 | CHF 2.85 | |
25 | 12H1476 | SEAL, MAIN BEARING END CAP, FRONT |
1 | 1 required for front - 18V on, 1971 on | CHF 2.85 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
26 | 51K1482 | STUD M/BRG MGB 18GB-GK |
10 | CHF 23.95 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
27 | 12H1063 | LOCKTAB MAIN MGB ONLY USED ON FIRST 18 000 GB ENGI |
5 | use together with item 28 | availability request (add quantity to basket, offer follows) |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
28 | FNZ508 | NUT 1/2 UNF HT |
10 | use together with item 27 | CHF 4.30 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
29 | ACA5521 | WASHER - MAIN END |
10 | use together with item 30 - alternative to 27 & 28 | CHF 5.35 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
30 | 13H4045 | NUT LOCKING 1/2 UNF, MAIN BEARING CAP |
10 | use together with item 29 - alternative to 27 & 28 | CHF 6.00 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
31 | 12B2356 | BOLT MAIN BEARING CAP MGB LATE 18V |
10 | 18V 71 on |
CHF 18.65 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
32 | 11G241 | Push Rod, engine |
8 | 18GB - 18GG 1964-71 | CHF 8.10 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
33 | 12H3167 | CAM FOLLOWER, TAPPET |
8 | 18GB - 18GG 1964-71 | CHF 13.30 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
34 | 11G203 | GEAR, CAMSHAFT, DUPLEX |
8 | 18GB - 18GG 1964-71 | CHF 38.35 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
36 | 12A1553 | CRANK GEAR DUPLEX B |
1 | 18GB - 18GG 1964-71 | CHF 32.70 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
38 | 12H3357 | PUSH ROD 18V ENGINE |
8 | 18V on, 1971 on | CHF 7.45 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
39 | 2A13 | CAM FOLLOWER, TAPPET, STANDARD |
8 | 18V on, 1971 on | CHF 10.40 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
40 | CAM5333 | SINGLE GEAR CAM MGB |
1 | 18V on, 1971 on | CHF 38.00 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
41 | 3H2127 | TIMING CHAIN SIMPLEX |
1 | 18V on, 1971 on | CHF 17.45 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
43 | 6K629 | NUT - CAMSHAFT |
1 | CHF 28.55 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
44 | 2A759 | LOCK TAB CAMSHAFT GEAR |
1 | CHF 3.35 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
45 | GHF117 | SCREW 1/4UNF X 3/4 |
3 | CHF 1.45 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
46 | GHF321 | WASHER STAR INT 1/4 |
3 | CHF 0.45 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
47 | 12H1673 | THRUSTPLATE CAMSHAFT RETAINING |
1 | CHF 31.45 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
48 | WKN505 | WOODRUFF KEY CAMSHAFT 5/8 D X5/32 |
1 | CHF 4.55 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
49 | 88G303Z | CAMSHAFT NEW |
1 | CHF 210.75 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
50 | GHF102 | BOLT 1/4 UNFX1-1/2IN |
2 | CHF 1.45 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
51 | AEC340 | LOCKTAB |
1 | CHF 4.80 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
52 | 12H3292 | TENSIONER TIMING CHAIN |
1 | CHF 23.15 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
53 | AEC339 | GASKET CHAIN TENSIONER |
1 | CHF 1.85 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
54 | 12H1019 | CON ROD CIRCLIP PISTON & HORIZ SPLIT |
4 | 18GB - 18GG floating small end |
availability request (add quantity to basket, offer follows) | |
54 | 12H1019R | CONROD MGB->71 |
4 | 18GB - 18GG floating small end |
availability request (add quantity to basket, offer follows) |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
56 | 6K881 | LOCK TAB BIG END >70 |
4 | CHF 4.80 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
57a | 12H2444 | CONROD MGB RECON |
4 | 18GG floating small end |
availability request (add quantity to basket, offer follows) | |
57b | 12H3596E | CONROD EXCHANGE |
4 | 18V press small end |
availability request (add quantity to basket, offer follows) |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
58 | 13H5872 | Nut, big end bolt |
8 | CHF 5.95 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
59 | VPB266 | SMALL END BUSH MGB |
4 | use with 54 & 57a | availability request (add quantity to basket, offer follows) |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
60 | 8G2664 | BEARING ENDS MGB 65> STD |
1 | standard | CHF 54.25 | |
60 | 8G2664/10 | BEARING ENDS MGB 65> +10 |
1 | 0,010" | CHF 54.25 | |
60 | 8G2664/10/HD | BEARING ENDS MGB 65-ON +10 HD |
1 | 0,010" heavy duty | CHF 112.40 | |
60 | 8G2664/20 | BEARING ENDS MGB 65> +20 |
1 | 0,020" | CHF 54.25 | |
60 | 8G2664/20/HD | BEARING ENDS MGB 65-ON +20 HD |
1 | 0,020" heavy duty | CHF 112.40 | |
60 | 8G2664/30 | BEARING ENDS MGB 65> +30 |
1 | 0,030" | CHF 54.25 | |
60 | 8G2664/40 | BEARING ENDS MGB 65> +40 |
1 | 0,040" | CHF 54.25 | |
60 | 8G2664/60 | BEARING ENDS MGB 65> +60 |
1 | 0,060" | CHF 54.25 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
61 | AEA312 | CRANK BOLT |
1 | CHF 31.95 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
62 | 12A398 | LOCKTAB |
1 | CHF 1.90 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
63 | 12H963 | PULLEY CRANKSHAFT, WITH DAMPER, 5 1/8" DIAMETER |
1 | 18GB - 18 GG - 18V chrome bumper - 5 1/8" diameter | CHF 154.35 | |
63 | 12H3516 | PULLEY CRANK |
1 | 18V rubber bumper - 6" diameter | availability request (add quantity to basket, offer follows) | |
63 | 433-707 | PULLEY CRANK HARMONIC DAMPING, 5 1/8"Ø |
1 | Chrome & Rubber | CHF 368.80 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
64 | 1A1546 | PLATE OILTHROWER ON CRANK |
1 | 18GB to 18GB11850 | availability request (add quantity to basket, offer follows) | |
64 | 12H1740 | PLATE OIL THROWER |
1 | 18GB11851 on | CHF 14.10 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
65 | 2K6633 | SHIM GEAR |
a/r | 0.005" | CHF 4.30 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
66 | BHM1295 | THRUST WASHERS STD |
1 | standard | CHF 32.30 | |
66 | BHM1295/3 | SET OF 4 THRUSTS+003 MGB |
1 | + 0.003" | availability request (add quantity to basket, offer follows) | |
66 | BHM1295/5 | THRUST WASHERS+.005 |
1 | + 0.005" | CHF 32.30 | |
66 | BHM129510 | THRUST WASHERS SET 0.010 |
1 | + 0.010" | availability request (add quantity to basket, offer follows) |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
67 | 8G2389 | MAINS MGB STD |
1 | standard | CHF 81.50 | |
67 | 8G2389/10 | MAINS MGB +10 |
1 | + 0.010" | CHF 81.50 | |
67 | 8G2389/20 | MAINS MGB +20 |
1 | + 0.020" | CHF 81.50 | |
67 | 8G2389/30 | CRANKSHAFT MAIN BEARING MGB +30 |
1 | + 0.030" | CHF 81.50 | |
67 | 8G2389/40 | MAINS MGB +40 |
1 | + 0.040" | CHF 81.50 | |
67 | 8G2389/60 | MAINS MGB +60 |
1 | + 0.060" | CHF 81.50 | |
67 | 8G2389/HD | MAIN BEARINGS STANDARD HEAVY DUTY |
1 | CHF 126.20 | ||
67 | 8G2389/10/HD | MAIN BEARINGS +010 HEAVY DUTY |
1 | CHF 126.20 | ||
67 | 8G2389/20/HD | MAIN BEARINGS +020 HEAVY DUTY |
1 | CHF 126.20 | ||
67 | 8G2389/30/HD | MAIN BEARINGS +030 HEAVY DUTY |
1 | CHF 126.20 | ||
67 | 8G2389/40/HD | MAIN BEARINGS +040 HEAVY DUTY |
1 | CHF 126.20 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
68 | BHM1155 | CRANKSHAFT NEW |
1 | standard | availability request (add quantity to basket, offer follows) | |
68 | BHM1155E | CRANK 1800 MGB 65> |
1 | with shells - re-ground/exchange | availability request (add quantity to basket, offer follows) | |
68 | 1 | tuftrided - use with 0.010" bearings |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
69 | 12H1630 | SPIGOT BUSH, 1.5" LONG |
1 | check length before ordering - 1 1/2" long | CHF 11.10 | |
69 | 22H1416 | BUSH SPIGOT, 1" LONG |
1 | check length before ordering - 1" long | CHF 10.55 | |
69 | STN71X | SPIGOT BUSH |
1 | use only if fitting a 5 bearing engine to a 3 synchro gearbox | CHF 87.25 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
70 | 12H1301 | DOWEL FLYWHEEL 7/16OD |
2/1 | qty. reduced 1978 on | CHF 4.45 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
71 | 12H1474E | FLYWHEEL MGB 5BRG |
1 | 18GB only, inertia starter | availability request (add quantity to basket, offer follows) | |
71 | 12H2184E | FLYWHEEL MGB LATE |
1 | 18GF on, pre-engaged starter | availability request (add quantity to basket, offer follows) |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
73 | 1G2984 | DOWEL CLUTCH COVER 5/16 |
3 | CHF 4.00 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
74 | 12H1303 | LOCKTAB FLYWHEEL |
1 | CHF 5.60 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
75 | 51K1809 | BOLT FLYWHEEL MGB |
6 | CHF 5.45 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
76 | JAM2036 | GASKET, WATER PUMP 5 BEARING |
1 | CHF 1.75 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
78 | GHF332 | WASHER SPRING 5/16 |
4 | CHF 0.25 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
82 | AJM273 | GSK SET MGB 5BRG PAYEN |
1 | CHF 58.75 |
Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
2 | 12H2521 |
PISTON SET, ENGINE SET, HIGH COMPRESSION, STANDARD
|
1 | 18GB-GG 8.75:1 CR 1964-1970 - 4 rings - high compression (use with Con Rod 12H1019 or 12H2444) | CHF 224.40 | |
2 | 12H2521/20 |
PISTON SET, ENGINE SET, HIGH COMPRESSION, +0.020"
|
1 | + 0,020" - 18GB-GG 8.75:1 CR 1964-1970 - 4 rings - high compression (use with Con Rod 12H1019 or 12H2444) | CHF 224.40 | |
2 | 12H2521/30 |
PISTON SET, ENGINE SET, HIGH COMPRESSION, +0.030"
|
1 | + 0,030" - 18GB-GG 8.75:1 CR 1964-1970 - 4 rings - high compression (use with Con Rod 12H1019 or 12H2444) | CHF 224.40 | |
2 | 12H2521/40 |
PISTON SET, ENGINE SET, HIGH COMPRESSION, +0.040"
|
1 | + 0,040" - 18GB-GG 8.75:1 CR 1964-1970 - 4 rings - high compression (use with Con Rod 12H1019 or 12H2444) | CHF 224.40 | |
2 | 12H2521/60 |
PISTON SET, ENGINE SET, HIGH COMPRESSION, +0.060"
|
1 | + 0,060" - 18GB-GG 8.75:1 CR 1964-1970 - 4 rings - high compression (use with Con Rod 12H1019 or 12H2444) | CHF 224.40 | |
2 | 12H5163 |
PISTON SET LOW COMPRESSION STD
|
1 | standard - 18V on 8.0:1 CR 1970 on - 3 rings - low compression (use with Con Rod 12H3596E) | CHF 212.10 | |
2 | 12H5163/20 |
PISTON SET LOW COMPRESSION +0.020"
|
1 | + 0,020" - 18V on 8.0:1 CR 1970 on - 3 rings - low compression (use with Con Rod 12H3596E) | CHF 212.10 | |
2 | 12H5163/30 |
PISTON SET LOW COMPRESSION +0.030"
|
1 | + 0,030" - 18V on 8.0:1 CR 1970 on - 3 rings - low compression (use with Con Rod 12H3596E) | CHF 212.10 | |
2 | 12H5163/40 |
PISTON SET LOW COMPRESSION, +0.040"
|
1 | + 0,040" - 18V on 8.0:1 CR 1970 on - 3 rings - low compression (use with Con Rod 12H3596E) | CHF 212.10 | |
2 | 12H5163H/STD |
PISTON SET HIGH COMPRESSION STD
|
1 | standard - 18V on 8.75:1 CR 1970 on - 3 rings - high compression (use with Con Rod 12H3596E) | CHF 205.90 | |
2 | 12H5163H/20 |
PISTON SET HIGH COMPRESSION +0.020"
|
1 | + 0,020" - 18V on 8.75:1 CR 1970 on - 3 rings - high compression (use with Con Rod 12H3596E) | CHF 205.90 | |
2 | 12H5163H/30 |
PISTON SET HIGH COMPRESSION +0.030"
|
1 | + 0,030" - 18V on 8.75:1 CR 1970 on - 3 rings - high compression (use with Con Rod 12H3596E) | CHF 205.90 | |
2 | 12H5163H/40 |
PISTON SET HIGH COMPRESSION +0.040"
|
1 | + 0,040" - 18V on 8.75:1 CR 1970 on - 3 rings - high compression (use with Con Rod 12H3596E) | CHF 205.90 | |
2 | 12H5163H/60 |
PISTON SET HIGH COMPRESSION +0.060"
|
1 | + 0,060" - 18V on 8.75:1 CR 1970 on - 3 rings - high compression (use with Con Rod 12H3596E) | CHF 205.90 | |
3 | BHM1184 |
RING SET MGB 64-70 4R
|
1 | standard - 18GB-GG - use with pistons 2a (12H2521) - high compression - 1964-70 - 4 rings | CHF 99.40 | |
3 | BHM1184/20 |
RING SET MGB 64-70 4R
|
1 | + 0,020" - 18GB-GG - use with pistons 2a (12H2521) - high compression - 1964-70 - 4 rings | CHF 99.40 | |
3 | BHM1184/30 |
RING SET MGB 64-70 4R
|
1 | + 0,030" - 18GB-GG - use with pistons 2a (12H2521) - high compression - 1964-70 - 4 rings | CHF 99.40 | |
3 | BHM1184/40 |
RING SET MGB 64-70 4R
|
1 | + 0,040" - 18GB-GG - use with pistons 2a (12H2521) - high compression - 1964-70 - 4 rings | CHF 99.40 | |
3 | BHM1184/60 |
RING SET +60 B 4R
|
1 | + 0,060" - 18GB-GG - use with pistons 2a (12H2521) - high compression - 1964-70 - 4 rings | CHF 101.95 | |
3 | BHM1183 |
RING SET MGB 18V STD
|
1 | 18V | CHF 88.05 | |
3 | BHM1183/20 |
RING SET MGB 18V +20
|
1 | 18V | CHF 88.05 | |
3 | BHM1183/30 |
RING SET MGB 18V +30
|
1 | 18V | CHF 88.05 | |
3 | BHM1183/40 |
RING SET MGB 18V +40
|
1 | 18V | CHF 88.05 | |
3 | BHM1183/60 |
RING SET MGB 18V +60
|
1 | 18V | CHF 88.05 | |
4 | 51K281 |
STUD LONG CYLINDER HEAD
|
4 | CHF 12.05 | ||
5 | 51K282 |
CYLINDER HEAD STUD SHORT
|
7 | CHF 17.95 | ||
5 | 51K281SET |
STUD SET B CYLINDER HEAD
|
1 | incl. 11 studs | CHF 82.75 | |
6 | 12H2178 |
WASHER FLAT 3/4 OD
|
11 | CHF 2.15 | ||
7 | 51K1193 |
NUT CYLINDER HEAD A&B SER
|
11 | original | CHF 3.85 | |
7 | 51K1193B |
NUT CYL.HEAD IMPROVD
|
11 | improved | CHF 11.90 | |
8 | 3H576 |
DRAIN TAP ENGINE BLOCK
|
1 | alternatives | CHF 43.40 | |
9 | 53K2853 |
PLUG-BLANKING
|
1 | alternatives | CHF 22.15 | |
10 | 2K4975 |
WASHER FIBRE 1/2" ID
|
1 | CHF 1.40 | ||
11 | 2K8169 |
CORE PLUG DISH 1 5/8 OE
|
4 | From 18GB | CHF 2.70 | |
11 | GAC7203X |
COREPLUG SET MGB
|
1 | From 18GB - set of 4 2K8169 | CHF 9.85 | |
11 | AEH592 |
CORE PLUG CUP 1 5/8
|
4 | From 18V (1976-on) | CHF 3.00 | |
12 | BHM1212 |
CAM BRG SET B SERIES
|
1 | incl. 3 bearings | CHF 26.40 | |
13 | 2A265 |
BLANKING PLATE, FUEL PUMP
|
1 | CHF 16.40 | ||
13 | 2A265K |
BLANKING PLATE KIT FUEL PUMP
|
1 | incl. blanking plate, gasket & hardware | CHF 16.60 | |
14 | 2A113 |
GASKET, PUMP TO BLOCK
|
1 | CHF 1.40 | ||
15 | GHF301 |
WASHER 5/16 X 5/8 M8
|
2 | CHF 0.40 | ||
16 | GHF332 |
WASHER SPRING 5/16
|
2 | CHF 0.25 | ||
17 | SH605041 |
SCREW 5/16" UNF X 1/2"
|
2 | CHF 1.20 | ||
18 | 6K638 |
COPPER WASHER 1/2IN
|
1 | 18GB engines | CHF 1.30 | |
18 | 232043A |
COPPER WASHER 13/16X5/8
|
1 | 18GG on | CHF 2.65 | |
19 | 53K2853 |
PLUG-BLANKING
|
1 | 18GB engines | CHF 22.15 | |
19 | 12H1715 |
DRAIN PLUG NCA
|
1 | 18GG on | availability request (add quantity to basket, offer follows) | |
20 | 12H865 |
VALVE OIL PRESSURE RELIEF
|
1 | CHF 12.55 | ||
21 | AEH798 |
DISC O P R VALVE KMS
|
1 | CHF 3.60 | ||
22 | 1H756 |
SPRING, RELIEF VALVE
|
1 | CHF 5.25 | ||
23 | 6K431B |
CRUSH WASHER 3/4IN
|
1 | CHF 3.35 | ||
23 | 12H865BK |
VALVE OIL PRESSURE & SPRING KIT
|
1 | aftermarket - contains items 20 & 22 | CHF 14.35 | |
24 | 12A1851 |
BLANKING PLUG
|
1 | CHF 18.95 | ||
25 | 12H1638 |
GASKET MAIN BEARING CAP, CORK
|
2 | 2 required for rear | CHF 2.85 | |
25 | 12H1638 |
GASKET MAIN BEARING CAP, CORK
|
1 | 1 required for front - to 18GG 1964-71 | CHF 2.85 | |
25 | 12H1476 |
SEAL, MAIN BEARING END CAP, FRONT
|
1 | 1 required for front - 18V on, 1971 on | CHF 2.85 | |
26 | 51K1482 |
STUD M/BRG MGB 18GB-GK
|
10 | CHF 23.95 | ||
27 | 12H1063 |
LOCKTAB MAIN MGB ONLY USED ON FIRST 18 000 GB ENGI
|
5 | use together with item 28 | availability request (add quantity to basket, offer follows) | |
28 | FNZ508 |
NUT 1/2 UNF HT
|
10 | use together with item 27 | CHF 4.30 | |
29 | ACA5521 |
WASHER - MAIN END
|
10 | use together with item 30 - alternative to 27 & 28 | CHF 5.35 | |
30 | 13H4045 |
NUT LOCKING 1/2 UNF, MAIN BEARING CAP
|
10 | use together with item 29 - alternative to 27 & 28 | CHF 6.00 | |
31 | 12B2356 |
BOLT MAIN BEARING CAP MGB LATE 18V
|
10 | 18V 71 on |
CHF 18.65 | |
32 | 11G241 |
Push Rod, engine
|
8 | 18GB - 18GG 1964-71 | CHF 8.10 | |
33 | 12H3167 |
CAM FOLLOWER, TAPPET
|
8 | 18GB - 18GG 1964-71 | CHF 13.30 | |
34 | 11G203 |
GEAR, CAMSHAFT, DUPLEX
|
8 | 18GB - 18GG 1964-71 | CHF 38.35 | |
35 | 2H4905 |
TIMING CHAIN DUPLEX
|
1 | 18GB - 18GG 1964-71 | CHF 18.90 | |
35 | 2H4905UR |
TIMING CHAIN DUPLEX , HEAVY DUTY
|
1 | 18GB - 18GG 1964-71 - high quality | CHF 86.20 | |
36 | 12A1553 |
CRANK GEAR DUPLEX B
|
1 | 18GB - 18GG 1964-71 | CHF 32.70 | |
37 | 2H326 |
WOODRUFF KEY CRANKSHAFT
|
2 | 18GB - 18GG 1964-71 | CHF 5.50 | |
37 | 12H4301 |
WOODRUFF KEY (CRANKSHAFT)
|
1 | 18V on, 1971 on | CHF 5.25 | |
38 | 12H3357 |
PUSH ROD 18V ENGINE
|
8 | 18V on, 1971 on | CHF 7.45 | |
39 | 2A13 |
CAM FOLLOWER, TAPPET, STANDARD
|
8 | 18V on, 1971 on | CHF 10.40 | |
40 | CAM5333 |
SINGLE GEAR CAM MGB
|
1 | 18V on, 1971 on | CHF 38.00 | |
41 | 3H2127 |
TIMING CHAIN SIMPLEX
|
1 | 18V on, 1971 on | CHF 17.45 | |
42 | 12H4201 |
GEAR, CRANKSHAFT DRIVE, SIMPLEX
|
1 | 18V on, 1971 on | CHF 27.15 | |
NI | TMG10728 |
DUPLEX KIT, TIMING CHAIN, VERNIER ADJUSTABLE
|
1 | incl. Vernier adj. cam gear | CHF 209.60 | |
43 | 6K629 |
NUT - CAMSHAFT
|
1 | CHF 28.55 | ||
44 | 2A759 |
LOCK TAB CAMSHAFT GEAR
|
1 | CHF 3.35 | ||
45 | GHF117 |
SCREW 1/4UNF X 3/4
|
3 | CHF 1.45 | ||
46 | GHF321 |
WASHER STAR INT 1/4
|
3 | CHF 0.45 | ||
47 | 12H1673 |
THRUSTPLATE CAMSHAFT RETAINING
|
1 | CHF 31.45 | ||
48 | WKN505 |
WOODRUFF KEY CAMSHAFT 5/8 D X5/32
|
1 | CHF 4.55 | ||
49 | 88G303Z |
CAMSHAFT NEW
|
1 | CHF 210.75 | ||
50 | GHF102 |
BOLT 1/4 UNFX1-1/2IN
|
2 | CHF 1.45 | ||
51 | AEC340 |
LOCKTAB
|
1 | CHF 4.80 | ||
52 | 12H3292 |
TENSIONER TIMING CHAIN
|
1 | CHF 23.15 | ||
53 | AEC339 |
GASKET CHAIN TENSIONER
|
1 | CHF 1.85 | ||
54 | 12H1019 |
CON ROD CIRCLIP PISTON & HORIZ SPLIT
|
4 | 18GB - 18GG floating small end |
availability request (add quantity to basket, offer follows) | |
54 | 12H1019R |
CONROD MGB->71
|
4 | 18GB - 18GG floating small end |
availability request (add quantity to basket, offer follows) | |
55 | 12H1000 |
BOLT CON ROD BIG END, 2 1/8" LONG
|
8 | 18GB - 18GG floating small end | CHF 23.95 | |
55 | LFH10006 |
BOLT BIG END
|
8 | use with con rods 57a & 57b | CHF 11.85 | |
56 | 6K881 |
LOCK TAB BIG END >70
|
4 | CHF 4.80 | ||
57a | 12H2444 |
CONROD MGB RECON
|
4 | 18GG floating small end |
availability request (add quantity to basket, offer follows) | |
57b | 12H3596E |
CONROD EXCHANGE
|
4 | 18V press small end |
availability request (add quantity to basket, offer follows) | |
58 | 13H5872 |
Nut, big end bolt
|
8 | CHF 5.95 | ||
59 | VPB266 |
SMALL END BUSH MGB
|
4 | use with 54 & 57a | availability request (add quantity to basket, offer follows) | |
60 | 8G2664 |
BEARING ENDS MGB 65> STD
|
1 | standard | CHF 54.25 | |
60 | 8G2664/10 |
BEARING ENDS MGB 65> +10
|
1 | 0,010" | CHF 54.25 | |
60 | 8G2664/10/HD |
BEARING ENDS MGB 65-ON +10 HD
|
1 | 0,010" heavy duty | CHF 112.40 | |
60 | 8G2664/20 |
BEARING ENDS MGB 65> +20
|
1 | 0,020" | CHF 54.25 | |
60 | 8G2664/20/HD |
BEARING ENDS MGB 65-ON +20 HD
|
1 | 0,020" heavy duty | CHF 112.40 | |
60 | 8G2664/30 |
BEARING ENDS MGB 65> +30
|
1 | 0,030" | CHF 54.25 | |
60 | 8G2664/40 |
BEARING ENDS MGB 65> +40
|
1 | 0,040" | CHF 54.25 | |
60 | 8G2664/60 |
BEARING ENDS MGB 65> +60
|
1 | 0,060" | CHF 54.25 | |
61 | AEA312 |
CRANK BOLT
|
1 | CHF 31.95 | ||
62 | 12A398 |
LOCKTAB
|
1 | CHF 1.90 | ||
63 | 12H963 |
PULLEY CRANKSHAFT, WITH DAMPER, 5 1/8" DIAMETER
|
1 | 18GB - 18 GG - 18V chrome bumper - 5 1/8" diameter | CHF 154.35 | |
63 | 12H3516 |
PULLEY CRANK
|
1 | 18V rubber bumper - 6" diameter | availability request (add quantity to basket, offer follows) | |
63 | 433-707 |
PULLEY CRANK HARMONIC DAMPING, 5 1/8"Ø
|
1 | Chrome & Rubber | CHF 368.80 | |
64 | 1A1546 |
PLATE OILTHROWER ON CRANK
|
1 | 18GB to 18GB11850 | availability request (add quantity to basket, offer follows) | |
64 | 12H1740 |
PLATE OIL THROWER
|
1 | 18GB11851 on | CHF 14.10 | |
65 | 2K6633 |
SHIM GEAR
|
a/r | 0.005" | CHF 4.30 | |
66 | BHM1295 |
THRUST WASHERS STD
|
1 | standard | CHF 32.30 | |
66 | BHM1295/3 |
SET OF 4 THRUSTS+003 MGB
|
1 | + 0.003" | availability request (add quantity to basket, offer follows) | |
66 | BHM1295/5 |
THRUST WASHERS+.005
|
1 | + 0.005" | CHF 32.30 | |
66 | BHM129510 |
THRUST WASHERS SET 0.010
|
1 | + 0.010" | availability request (add quantity to basket, offer follows) | |
67 | 8G2389 |
MAINS MGB STD
|
1 | standard | CHF 81.50 | |
67 | 8G2389/10 |
MAINS MGB +10
|
1 | + 0.010" | CHF 81.50 | |
67 | 8G2389/20 |
MAINS MGB +20
|
1 | + 0.020" | CHF 81.50 | |
67 | 8G2389/30 |
CRANKSHAFT MAIN BEARING MGB +30
|
1 | + 0.030" | CHF 81.50 | |
67 | 8G2389/40 |
MAINS MGB +40
|
1 | + 0.040" | CHF 81.50 | |
67 | 8G2389/60 |
MAINS MGB +60
|
1 | + 0.060" | CHF 81.50 | |
67 | 8G2389/HD |
MAIN BEARINGS STANDARD HEAVY DUTY
|
1 | CHF 126.20 | ||
67 | 8G2389/10/HD |
MAIN BEARINGS +010 HEAVY DUTY
|
1 | CHF 126.20 | ||
67 | 8G2389/20/HD |
MAIN BEARINGS +020 HEAVY DUTY
|
1 | CHF 126.20 | ||
67 | 8G2389/30/HD |
MAIN BEARINGS +030 HEAVY DUTY
|
1 | CHF 126.20 | ||
67 | 8G2389/40/HD |
MAIN BEARINGS +040 HEAVY DUTY
|
1 | CHF 126.20 | ||
68 | BHM1155 |
CRANKSHAFT NEW
|
1 | standard | availability request (add quantity to basket, offer follows) | |
68 | BHM1155E |
CRANK 1800 MGB 65>
|
1 | with shells - re-ground/exchange | availability request (add quantity to basket, offer follows) | |
68 | 1 | tuftrided - use with 0.010" bearings | ||||
69 | 12H1630 |
SPIGOT BUSH, 1.5" LONG
|
1 | check length before ordering - 1 1/2" long | CHF 11.10 | |
69 | 22H1416 |
BUSH SPIGOT, 1" LONG
|
1 | check length before ordering - 1" long | CHF 10.55 | |
69 | STN71X |
SPIGOT BUSH
|
1 | use only if fitting a 5 bearing engine to a 3 synchro gearbox | CHF 87.25 | |
70 | 12H1301 |
DOWEL FLYWHEEL 7/16OD
|
2/1 | qty. reduced 1978 on | CHF 4.45 | |
71 | 12H1474E |
FLYWHEEL MGB 5BRG
|
1 | 18GB only, inertia starter | availability request (add quantity to basket, offer follows) | |
71 | 12H2184E |
FLYWHEEL MGB LATE
|
1 | 18GF on, pre-engaged starter | availability request (add quantity to basket, offer follows) | |
72 | 1G2874 |
RING GEAR, 120 TEETH, 10 3/4" ID
|
1 | 10 3/4" diameter - 1964-67, use with 12H1474E (71) | CHF 38.05 | |
72 | 12H2900 |
RING GEAR, 127 TEETH
|
1 | 11 1/2" diameter - 1967 on, use with 12H2184E (71) | CHF 41.55 | |
73 | 1G2984 |
DOWEL CLUTCH COVER 5/16
|
3 | CHF 4.00 | ||
74 | 12H1303 |
LOCKTAB FLYWHEEL
|
1 | CHF 5.60 | ||
75 | 51K1809 |
BOLT FLYWHEEL MGB
|
6 | CHF 5.45 | ||
76 | JAM2036 |
GASKET, WATER PUMP 5 BEARING
|
1 | CHF 1.75 | ||
77 | BH605151 |
BOLT 5/16UNFX1 7/8
|
2 | 18GB - 18GG, use with GWP114 | CHF 1.30 | |
77 | BH605161 |
BOLT 5/16UNFX2IN
|
2 | 18 V - use with GWP130 | CHF 2.85 | |
78 | GHF332 |
WASHER SPRING 5/16
|
4 | CHF 0.25 | ||
79 | BH605111 |
BOLT 5/16UNFX1 3/8
|
2 | 18GB - 18GG, use with GWP114 | CHF 2.45 | |
79 | GHF103 |
SCREW 5/16 UNF X 1IN
|
2 | 18V, use with GWP130 | CHF 0.90 | |
80 | GWP114 |
WATER PUMP, WITH GASKET
|
1 | 18GB-18GG engines 1965-70 (4.15" from pulley flange front face to block face) | CHF 64.35 | |
80 | GWP130 |
WATER PUMP WITH GASKET
|
1 | 18V engines 1970 on (3.26" from pulley flange front face to block face) | CHF 55.80 | |
81 | AJM1163 |
GASKET SET HEAD MGB
|
1 | with composite head gasket | CHF 80.40 | |
81 | AJM1163Z |
GASKET SET TOP MGB
|
1 | with fibre head gasket | CHF 35.30 | |
81 | GEG1163C |
GASKET SET, CYLINDER HEAD, COPPER
|
1 | with copper head gasket | CHF 54.05 | |
82 | AJM273 |
GSK SET MGB 5BRG PAYEN
|
1 | CHF 58.75 | ||
NI | CCEP1BR |
ENGINE PAINT MAROON, BRUSH ON, 500ML
|
1 | CHF 44.30 |