JENSEN INTERCEPTOR II - DIFFERENTIAL & RELATED PARTS

CAR IDENTIFICATION JENSEN INTERCEPTOR

When ordering parts, it is essential that your car is identified exactly, by model year and serial number. Since many part changes were made during model years, the car number, engine number and body number provide the only positive identification. Quite often a car's title will not show the correct model year. Before ordering parts, please use the space provided to copy the applicable numbers from your car. Use of these numbers is the best way to insure that you order and receive the correct parts. Wherever possible, we have listed part applications by car number. In some cases, we had to use the engine numbers or body numbers.

Chassis Prefixes are as follows:

Chassis Prefix	Drive	Engine	Model
128	RH	383 cu. in G Series	Int. III
		440 cu. in H Series
129	LH (Europe)	383 cu. in G Series	Int. III
		440 cu. in H Series
130	RH	383 cu. in E. Series	FF III (for engine & transmission breakdown refer Mk II)
131	RH	440 cu. in G Series	SP
		440 cu. in H Series
132	LH	440 cu. in G Series	SP
		440 cu. in H Series
133	LH (USA)	383 cu. in G Series	Int. III
		440 cu. in H Series
134	LH (USA)	440 cu. in H Series	SP
136	RH	440 cu. in J Series	Int. III
137	LH (Europe)	440 cu. in J Series	Int. III
138	RH	440 cu. in H Series	SP
140	LH (USA)	440 cu. in J Series	Int. III

Four Digit Prefixes - 1974 onwards

1. digit describes model type	2 = Interceptor
2. digit describes body style	2 = Saloon 3 = Convertible
3. digit desribes drive	1 = LHD USA 2 = LHD Europe 3 = LHD Europe 4 = RHD
4. digit describes market area	0 = USA, Austria, Switzerland, UK 1 = Germany, Australia 2 = France, Japan 3 = Belgium, Holland, New Zealand 4 = Hong Kong
4. digit prefixes do not include a model year

In Engine and Transmission Sections the columns are headed by engine series. Although these apply loosely to the year of vehicle manufacture, this cannot be relied upon and reference shoult be made to the identification pad on the cylinder block adjacent to the distributor.
H Series	1972
J Series	1973
Series 4	1974

The fitting of parts or accessories not approved by the manufacturer will invalidate the warranty.

DIFFERENTIAL

Ill.no.	Partno.	Part	Quantity required	Info	Price
24	CT5163	REAR AXLE SEAL RUBBER, ID 36MM	1		CHF 32.45
24	607183J	PAPER GASKET BEHIND DIFF PINION SEAL	1	paper gasket for oil seal	CHF 4.20

Ill.no.	Partno.	Part	Quantity required	Info	Price
25	CT5179	BEARING OUTER	1		CHF 67.70

Ill.no.	Partno.	Part	Quantity required	Info	Price
25A	CT5165	SHIM DIF 0.003 IN			CHF 4.75
25A	CT5169	SHIM DIF 0.005 IN			CHF 4.60

Ill.no.	Partno.	Part	Quantity required	Info	Price
26	CT5178	BEARING INNER	1		CHF 77.20

Ill.no.	Partno.	Part	Quantity required	Info	Price
28	CT5177	SPACER	1		CHF 27.90

Ill.no.	Partno.	Part	Info	Price
29	CT5165	SHIM DIF 0.003 IN	127	CHF 4.75
29	CT5166	SHIM DIF 0.005 IN		CHF 5.20
29	CT5172	SHIM DIF 0.010 IN		CHF 4.80
29	CT5168	SHIM DIF 0.003 IN	123	CHF 4.80

Ill.no.	Partno.	Part	Quantity required	Info	Price
30	CT5150	BEARING	2		CHF 83.35

Ill.no.	Partno.	Part	Quantity required	Info	Price
24	CT5163	REAR AXLE SEAL RUBBER, ID 36MM	1		CHF 32.45
24	607183J	PAPER GASKET BEHIND DIFF PINION SEAL	1	paper gasket for oil seal	CHF 4.20
25	CT5179	BEARING OUTER	1		CHF 67.70
25A	CT5165	SHIM DIF 0.003 IN			CHF 4.75
25A	CT5169	SHIM DIF 0.005 IN			CHF 4.60
26	CT5178	BEARING INNER	1		CHF 77.20
28	CT5177	SPACER	1		CHF 27.90
29	CT5165	SHIM DIF 0.003 IN		127	CHF 4.75
29	CT5166	SHIM DIF 0.005 IN			CHF 5.20
29	CT5172	SHIM DIF 0.010 IN			CHF 4.80
29	CT5168	SHIM DIF 0.003 IN		123	CHF 4.80
30	CT5150	BEARING	2		CHF 83.35