Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
RTC2299E |
EXCHANGE SHORT ENGINE TR7
|
1 | 9.25:1, high Compression Rate |
availability request (add quantity to basket, offer follows) | ||
NI | AJM1220 |
GASKET SET TOP TR7
|
1 | CHF 51.00 | ||
NI | GUG1549CS |
GASKET SET, BOTTOM END, SUMP
|
1 | CHF 40.80 | ||
NI | 153768 |
ENGINE LIFTING EYE REAR
|
1 | CHF 40.00 | ||
2 | RKC3481D |
BARE CYLINDER BLOCK SLANT TOP TR7
|
1 | availability request (add quantity to basket, offer follows) | ||
3 | 144688 |
CORE PLUG 1.5"
|
1 | CHF 4.70 | ||
4 | 144648 |
CORE PLUG BUCKET TYPE 1 5/8 DIAM
|
2 | availability request (add quantity to basket, offer follows) | ||
5 | 144687 |
USE AEA635
|
1 | |||
6 | 153972 |
CORE PLUG-BUCKET 27.25MM (1.1/16")
|
1 | CHF 8.85 | ||
8 | 129077 |
PLUG, WATER DRAIN
|
1 | CHF 20.65 | ||
9 | ARH517 |
WASHER FIBRE 1/2 ID
|
1 | CHF 0.60 | ||
10 | 129077 |
PLUG, WATER DRAIN
|
1 | CHF 20.65 | ||
11 | ARH517 |
WASHER FIBRE 1/2 ID
|
1 | CHF 0.60 | ||
13 | UKC1979 |
BOLT MAIN BRG CAP - ALL OHC TRI ENGINES
|
10 | availability request (add quantity to basket, offer follows) | ||
14 | 143149U |
HOUSING & OIL SEAL CRANKSHAFT REAR
|
1 | availability request (add quantity to basket, offer follows) | ||
15 | 143148 |
OIL SEAL, CRANKSHAFT
|
1 | CHF 10.80 | ||
16 | 143845 |
GASKET REAR OIL SEAL
|
1 | CHF 2.70 | ||
17 | GHF117 |
SCREW 1/4UNF X 3/4
|
4 | top 4 positions on housing | CHF 1.45 | |
18 | SH604071 |
SCREW 1/4" UNF X 7/8"
|
2 | lower 2 positions on housing | CHF 0.40 | |
19 | GHF331 |
WASHER SPRING 1/4
|
6 | CHF 0.55 | ||
20 | RKC514E |
CRANKSHAFT REGROUND EXCHANGE
|
1 | Purchase bearings to suit when ordering crankshaft. | availability request (add quantity to basket, offer follows) | |
21 | AEM5267STD |
MAINS STD TR7 & SPRINT
|
1 | CHF 98.40 | ||
21 | AEM5267010 |
MAINS +010 TR7 & DOLOMITE
|
1 | CHF 98.40 | ||
21 | AEM5267020 |
MAIN BEARING SET +020 TRIUMPH TR7 & DOLOMITE SPRIN
|
1 | availability request (add quantity to basket, offer follows) | ||
21 | AEM5267030 |
MAINS +30 TR7 & SPRINT
|
1 | CHF 98.40 | ||
22 | AEW2182STD |
THRUST WASHER STD KMS
|
a/r | CHF 16.40 | ||
22 | AEW2182005 |
THRUST WASHER +5 TR7
|
a/r | CHF 16.40 | ||
23 | 150763 |
PILOT/SPIGOT BUSH - BRASS - MANUAL TRANSMISSION
|
1 | to (e) CG8893 (4 speed) | CHF 11.00 | |
23 | UKC8154 |
ROLLER BEARING
|
1 | from (e) CG8894 (5 speed) | CHF 26.05 | |
24 | RTC1756 |
BIG END BEARINGS STD
|
1 | CHF 75.90 | ||
24 | RTC1756010 |
BIG END BEARINGS +010
|
1 | CHF 75.90 | ||
24 | RTC1756020 |
BIG END BEARINGS +020
|
1 | CHF 75.90 | ||
24 | RTC1756030 |
BIG END BEARINGS +030
|
1 | CHF 75.90 | ||
24 | RTC1756040 |
BIG END BEARINGS +040
|
1 | CHF 75.90 | ||
24 | RTC1756060 |
BIG END BEARINGS +060
|
1 | CHF 75.90 | ||
25 | 157874 |
USE 157874R
|
4 | |||
25 | 157874R |
CON ROD ASSEMBLY RECONDITIONED
|
4 | availability request (add quantity to basket, offer follows) | ||
26 | 157873 |
SMALL END BUSH TR7
|
4 | availability request (add quantity to basket, offer follows) | ||
27 | 146034 |
BOLT CON-ROD
|
8 | CHF 38.35 | ||
28 | EAC5541A |
USE EAC5541
|
8 | |||
High compression engines with too high a C.R. (resulting from an over-skimmed head) may use low compression pistons or alternatively a thicker head gasket (part number TT10236), to reduce the compression ratio. | ||||||
30 | UKC8519STD |
PISTON SET STANDARD EU
|
1 | Alternative to Hepolite 19985 | CHF 417.80 | |
30 | UKC8519/20 |
PISTON SET +20 EU
|
1 | Alternative to Hepolite 19985 | CHF 416.90 | |
30 | UKC8519/30 |
PISTON SET +30 EU
|
1 | Alternative to Hepolite 19985 | CHF 417.80 | |
30 | UKC8519/40 |
PISTON SET +40 EU
|
1 | Alternative to Hepolite 19985 | CHF 417.80 | |
30 | AE19906STD |
PISTON TR7 LC 8V 2L REPRO SET 4
|
1 | Low compression - Alternative to Hepolite 19906 | availability request (add quantity to basket, offer follows) | |
30 | AE19906020 |
PISTON TR7 LC 8V USA REPRO SET4 +0.020
|
1 | Low compression - Alternative to Hepolite 19906 | availability request (add quantity to basket, offer follows) | |
30 | AE19906030 |
PISTON TR7 LC 8V USA SET 4 REPRO +0.030
|
1 | Low compression - Alternative to Hepolite 19906 | availability request (add quantity to basket, offer follows) | |
30 | AE19906040 |
PISTON TR7 LC 8V SET4 REPRO +0.040
|
1 | Low compression - Alternative to Hepolite 19906 | availability request (add quantity to basket, offer follows) | |
31 | 158071 |
GUDGEON PIN
|
4 | availability request (add quantity to basket, offer follows) | ||
32 | 158632 |
CIRCLIP PISTON
|
8 | availability request (add quantity to basket, offer follows) | ||
33 | RA27466STD |
PISTON RING SET STANDARD
|
1 | high & low | CHF 111.15 | |
33 | RA27466020 |
PISTON RING SET +0.020" TR7
|
1 | high & low | CHF 111.15 | |
35 | TKC895 |
REAR ENGINE PLATE
|
1 | Manual Models | CHF 73.70 | |
38 | UKC8996 |
SHIM 5.10MM
|
1 | CHF 45.00 | ||
38 | UKC8998 |
SHIM 5.16MM
|
1 | availability request (add quantity to basket, offer follows) | ||
40 | TKC411 |
USE TKC411E
|
1 | manual models | ||
40 | TKC411E |
FLYWHEEL EXCHANGE
|
1 | manual models | availability request (add quantity to basket, offer follows) | |
41 | 214599 |
RING GEAR TR7 STAG
|
1 | all models | CHF 60.90 | |
42 | UKC998 |
LOCKTAB
|
1 | manual models to (e) CG8893 | availability request (add quantity to basket, offer follows) | |
43 | UKC3044 |
BOLT FLYWHEEL
|
8 | manual models | CHF 31.10 | |
44 | DP408 |
DOWEL PEG - CLUTCH
|
3 | CHF 3.35 | ||
50 | 215207 |
IDLER SHAFT
|
1 | availability request (add quantity to basket, offer follows) | ||
51 | 143139 |
USE 143139U
|
1 | |||
51 | 143139U |
KEEP PLATE IDLER SHAFT
|
1 | availability request (add quantity to basket, offer follows) | ||
52 | 144281 |
SCREW - PLATE ATTACHMENT
|
2 | CHF 2.70 | ||
60 | UKC954 |
TIMING COVER
|
1 | CHF 48.40 | ||
61 | 145916 |
GASKET FRONT COVER TR7
|
1 | CHF 3.85 | ||
62 | 144666 |
USE GUG705781GM
|
1 | |||
62 | GUG705781GM |
GASKET, TIMING COVER TO LH SIDE OF BLOCK
|
1 | CHF 3.85 | ||
63 | UKC5446 |
USE UKC5446U
|
1 | |||
63 | UKC5446U |
DEGREE INDICATOR, IGNITION TIMING
|
1 | availability request (add quantity to basket, offer follows) | ||
64 | AB610031 |
SELF TAPPER
|
2 | CHF 0.95 | ||
65 | BH605211 |
BOLT 5/16UNF X 2-5/8
|
2 | CHF 5.25 | ||
65 | BH605171 |
USE BH605181
|
6 | |||
66 | BH605321 |
BOLT 5/16 UNF X 4IN
|
1 | CHF 5.25 | ||
67 | BH605161 |
BOLT 5/16UNFX2IN
|
1 | CHF 2.85 | ||
68 | GHF301 |
WASHER 5/16 X 5/8 M8
|
6 | CHF 0.40 | ||
69 | GHF201 |
NUT 5/16 UNF
|
1 | CHF 0.35 | ||
70 | WP129 |
WASHER, PLAIN, 5/16" ID X 3/4" OD
|
1 | CHF 2.60 | ||
71 | WF508 |
WASHER, FIBRE, 5/16" ID X 1/2" OD
|
1 | CHF 1.90 | ||
75 | 150581 |
USE SH605101
|
1 | |||
76 | GHF301 |
WASHER 5/16 X 5/8 M8
|
2 | CHF 0.40 | ||
77 | GHF201 |
NUT 5/16 UNF
|
2 | CHF 0.35 | ||
80 | UKC3344 |
OIL SEAL - CRANKSHAFT FRONT - TIMING COVER
|
1 | CHF 8.00 | ||
81 | TKC47 |
CRANK PULLEY
|
1 | availability request (add quantity to basket, offer follows) | ||
82 | 148168 |
USE 148168U
|
1 | |||
82 | 148168U |
WASHER
|
1 | availability request (add quantity to basket, offer follows) | ||
83 | 156499 |
BOLT CRANKSHAFT PULLEY
|
1 | CHF 17.75 | ||
84 | 143311 |
DEFLECTOR FRONT
|
1 | availability request (add quantity to basket, offer follows) | ||
85 | 143257 |
CRANK SPROCKET
|
1 | CHF 50.35 | ||
86 | 144948 |
KEY CRANK TO GEAR
|
1 | CHF 9.50 | ||
87 | 145275 |
SHIM CRANKSHAFT 0.004"
|
a/r | 0.004" | CHF 5.35 | |
87 | 145276 |
SHIM CRANKSHAFT 0.006"
|
a/r | 0.006" | CHF 5.35 | |
88 | 144895 |
SPROCKET FOR JACK SHAFT TR7
|
1 | CHF 36.20 | ||
89 | 149789 |
CAM GEAR
|
1 | CHF 54.25 | ||
90 | 151089 |
TENSIONER TIMING CHAIN
|
1 | CHF 29.05 | ||
91 | 151277 |
BACKING PLATE
|
1 | CHF 9.30 | ||
92 | BH604101 |
BOLT 1/4 UNF X 1.25
|
2 | CHF 1.90 | ||
93 | GHF331 |
WASHER SPRING 1/4
|
2 | CHF 0.55 | ||
95 | 148008 |
BOLT CAM GEAR ATTCH TRI OHC
|
1 | availability request (add quantity to basket, offer follows) | ||
96 | 148009 |
LOCKTAB JACKSHAFT/GEAR OHC ENGINE
|
1 | CHF 10.40 | ||
97 | DP508 |
DOWEL, REAR COVER LOCATING
|
1 | CHF 5.00 | ||
100 | 214930 |
SUPPORT BRACKET
|
1 | CHF 53.80 | ||
101 | SH605051 |
SCREW 5/16" UNF X 5/8"
|
2 | CHF 3.10 | ||
102 | GHF332 |
WASHER SPRING 5/16
|
2 | CHF 0.25 | ||
105 | 149788 |
USE 149788U
|
1 | |||
105 | 149788U |
NUT
|
1 | availability request (add quantity to basket, offer follows) | ||
106 | 154161 |
LOCKTAB CAMSHAFT
|
2 | CHF 16.15 | ||
107 | SH604041 |
SCREW 1/4" UNF X 1/2"
|
2 | CHF 0.40 | ||
110 | 212958 |
TIMING CHAIN STANDARD - 106 LINKS
|
1 | CHF 28.65 | ||
111 | 147907 |
GUIDE TIMING CHAIN, UPPER
|
1 | CHF 17.90 | ||
112 | 148115 |
TIMING CHAIN GUIDE, LOWER
|
1 | CHF 44.00 | ||
113 | SH605051 |
SCREW 5/16" UNF X 5/8"
|
4 | CHF 3.10 | ||
114 | GHF332 |
WASHER SPRING 5/16
|
4 | CHF 0.25 | ||
115 | GHF301 |
WASHER 5/16 X 5/8 M8
|
4 | CHF 0.40 | ||
121 | RKC726U |
SUMP PAN
|
1 | availability request (add quantity to basket, offer follows) | ||
122 | AJM555 |
GASKET SUMP TR7
|
1 | CHF 13.75 | ||
123 | BH605131 |
BOLT 5/16UNF X 1-5/8
|
1 | CHF 2.65 | ||
124 | BH605101 |
BOLT 5/16UNFX1 1/4
|
1 | CHF 3.75 | ||
125 | GHF104 |
BOLT 5/16 UNFX 1.5IN
|
1 | CHF 1.35 | ||
126 | GHF120 |
SCREW 5/16 UNF X 3/4
|
16 | 13 short, 3 long screws (long not not available) | CHF 0.80 | |
130 | WP129 |
WASHER, PLAIN, 5/16" ID X 3/4" OD
|
2 | above block | CHF 2.60 | |
131 | WP129 |
WASHER, PLAIN, 5/16" ID X 3/4" OD
|
3 | below block | CHF 2.60 | |
132 | GHF332 |
WASHER SPRING 5/16
|
19 | CHF 0.25 | ||
133 | GHF201 |
NUT 5/16 UNF
|
3 | CHF 0.35 | ||
134 | 114774 |
PLUG, OIL FILLER, TAPERED
|
1 | CHF 10.35 | ||
136 | UKC4763 |
LOWER EXTENSION DIPSTICK
|
1 | no longer available | availability request (add quantity to basket, offer follows) | |
137 | UKC4348 |
HOSE - VACUUM - CTF
|
1 | availability request (add quantity to basket, offer follows) | ||
138 | UKC4358 |
CONNECTOR - UPPER DIPSTICK
|
1 | no longer available - use TKC5655 | availability request (add quantity to basket, offer follows) | |
138 | TKC5655 |
DIPSTICK CONVERSION
|
1 | Replacement (conversion) | availability request (add quantity to basket, offer follows) | |
139 | CC5009 |
USE GGT1114X
|
1 | |||
139 | GGT1114X |
HOSE CLIP 14MM
|
1 | CHF 5.35 | ||
140 | TKC5515 |
DIPSTICK FLEXIBLE TYPE
|
1 | availability request (add quantity to basket, offer follows) | ||
140 | TKC6507 |
DIPSTICK USA FUEL INJECTION
|
1 | availability request (add quantity to basket, offer follows) | ||
NI | RTC2375 |
STUD KIT, CYLINDER HEAD
|
1 | Includes studs & nuts to locate cylinder head | CHF 110.80 | |
155 | TKC2199 |
USE TKC2199U
|
1 | |||
155 | TKC2199U |
CAM COVER USED
|
1 | availability request (add quantity to basket, offer follows) | ||
156 | 148090 |
RUBBER WASHER
|
4 | CHF 1.90 | ||
157 | 147738 |
CUP WASHER ROCKER COVER
|
4 | CHF 6.25 | ||
158 | 147737 |
TUBE NUT, RETAINING ROCKER COVER
|
4 | CHF 11.00 | ||
159 | GFE6015 |
CAP OIL FILLER
|
1 | availability request (add quantity to basket, offer follows) | ||
160 | PT755 |
CAMSHAFT COVER SCREW TR7
|
2 | CHF 4.10 | ||
161 | GHF331 |
WASHER SPRING 1/4
|
2 | CHF 0.55 | ||
162 | AJM447 |
GASKET ROCKER COVER
|
1 | CHF 17.30 | ||
164 | 149080 |
STUD CYLINDER HEAD
|
5 | CHF 25.55 | ||
165 | UKC9954 |
NUT - HEAD STUD
|
5 | CHF 4.75 | ||
166 | UKC9871 |
STUD CYLINDER HEAD, LONG
|
3 | CHF 16.90 | ||
167 | UKC9870 |
HEAD BOLT - SHORT 7/16" UNC
|
2 | CHF 15.15 | ||
168 | UKC9786 |
WASHER-CYLINDER HEAD-TR7
|
10 | CHF 16.80 | ||
169 | GEG3304 |
CYLINDER HEAD GASKET
|
1 | standard | CHF 43.00 | |
169 | TT10236 |
GASKET, CYLINDER HEAD TO BLOCK, EXTRATHICK (+ ·020")
|
1 | thick (+ 0·020") | CHF 43.00 | |
169 | AJM1220 |
GASKET SET TOP TR7
|
1 | CHF 51.00 | ||
172 | 214643 |
CAMSHAFT TR7 NEW
|
1 | availability request (add quantity to basket, offer follows) | ||
172 | 214643E |
CAMSHAFT EXCHANGE
|
1 | availability request (add quantity to basket, offer follows) | ||
173 | 148324 |
STUD CAMSHAFT RETAINING
|
6 | short | availability request (add quantity to basket, offer follows) | |
174 | 148323 |
STUD 5/16 UNF (P=5)
|
4 | long | availability request (add quantity to basket, offer follows) | |
175 | 148321 |
LOCATOR SLEEVE, SHORT
|
5 | CHF 9.85 | ||
176 | 150323 |
LOCATOR SLEEVE, LONG
|
5 | CHF 10.45 | ||
177 | WB108051 |
WASHER PLAIN 5/16ID
|
10 | availability request (add quantity to basket, offer follows) | ||
178 | GHF201 |
NUT 5/16 UNF
|
10 | CHF 0.35 | ||
180 | 144488 |
RUBBER PLUG
|
2 | Front & rear of head to cam cover | CHF 4.00 | |
181 | UKC181 |
VALVE-INLET TR7
|
4 | availability request (add quantity to basket, offer follows) | ||
182 | 155524 |
EXHAUST VALVE TR7 & STAG
|
4 | CHF 28.00 | ||
183 | UKC1856 |
SEAT, INLET VALVE
|
4 | CHF 7.05 | ||
184 | 150863 |
SEAT, EXHAUST VALVE
|
4 | CHF 11.40 | ||
185 | 142476 |
VALVE GUIDE
|
8 | CHF 9.35 | ||
185 | TT1519 |
BRONZE GUIDE SET 8 8V OHC ENGINE
|
1 | availability request (add quantity to basket, offer follows) | ||
186 | 148885 |
SPRING SEAT OHC MODELS
|
8 | availability request (add quantity to basket, offer follows) | ||
187 | UKC1904 |
USE 151763
|
8 | |||
187 | 151763 |
VALVE SPRING
|
8 | CHF 4.50 | ||
188 | 148886 |
CAP VALVE SPRING TRI-OHC MODELS
|
8 | availability request (add quantity to basket, offer follows) | ||
188 | UKC1902 |
VALVE SPRING CAP TR7
|
8 | availability request (add quantity to basket, offer follows) | ||
189 | 106663 |
COTTER, VALVE, SPLIT CONE TYPE, EACH
|
32 | CHF 7.45 | ||
190 | 148195 |
ADJUSTING SHIM 0.090" /2.286mm
|
availability request (add quantity to basket, offer follows) | |||
190 | 148196A |
ADJUSTING SHIM 0.091"/2.311mm
|
CHF 5.25 | |||
190 | 148197 |
ADJUSTING SHIM 0.092"/2.336mm
|
CHF 5.25 | |||
190 | 148198A |
ADJUSTING SHIM 0.093"/2.362mm
|
CHF 6.25 | |||
190 | 148199 |
ADJUSTING SHIM 0.094"/2.387mm
|
availability request (add quantity to basket, offer follows) | |||
190 | 148200A |
ADJUSTING SHIM 0.095"/2.413mm
|
CHF 5.25 | |||
190 | 148201 |
ADJUSTING SHIM 0.096" /2.438mm
|
CHF 11.20 | |||
190 | 148202A |
ADJUSTING SHIM 0.097"/2.463mm
|
CHF 5.25 | |||
190 | 148203 |
ADJUSTING SHIM 0.098"/2.489mm
|
CHF 5.25 | |||
190 | 148204A |
ADJUSTING SHIM 0.099"/2.514mm
|
availability request (add quantity to basket, offer follows) | |||
190 | 148205 |
ADJUSTING SHIM 0.100"/2.540mm
|
CHF 5.25 | |||
190 | 148206A |
ADJUSTING SHIM 0.101"/2.565mm
|
CHF 5.05 | |||
190 | 148207 |
ADJUSTING SHIM 0.102"/2.590mm
|
CHF 9.20 | |||
190 | 148208A |
ADJUSTING SHIM 0.103"/2.616mm
|
CHF 5.25 | |||
190 | 148209 |
ADJUSTING SHIM 0.104"/2.641mm
|
CHF 5.25 | |||
190 | 148210A |
ADJUSTING SHIM 0.105"/2.667mm
|
availability request (add quantity to basket, offer follows) | |||
190 | 148211 |
ADJUSTING SHIM 0.106"/2.692mm
|
CHF 9.20 | |||
190 | 148212A |
ADJUSTING SHIM 0.107"/2.717mm
|
CHF 6.50 | |||
190 | 148213 |
ADJUSTING SHIM 0.108"/2.743mm
|
CHF 9.20 | |||
190 | 148214A |
ADJUSTING SHIM 0.109"/2.768mm
|
CHF 9.20 | |||
190 | 148215 |
ADJUSTING SHIM 0.110"/2.794mm
|
CHF 9.20 | |||
190 | 148216A |
ADJUSTING SHIM 0.111"/2.819mm
|
availability request (add quantity to basket, offer follows) | |||
190 | 148217 |
ADJUSTING SHIM 0.112"/2.844mm
|
availability request (add quantity to basket, offer follows) | |||
190 | 148218A |
ADJUSTING SHIM 0.113"/2.870mm
|
CHF 9.20 | |||
190 | 148219 |
ADJUSTING SHIM 0.114"/2.895mm
|
CHF 5.25 | |||
190 | UKC1985 |
ADJUSTING SHIM 0.115"/2.921mm
|
availability request (add quantity to basket, offer follows) | |||
190 | UKC1986 |
ADJUSTING SHIM 0.116"/2.946mm
|
CHF 10.50 | |||
190 | UKC1987 |
ADJUSTING SHIM 0.117"/2.971mm
|
CHF 10.50 | |||
190 | UKC1988 |
ADJUSTING SHIM 0.1182"/2.997mm
|
CHF 10.50 | |||
190 | UKC1989 |
ADJUSTING SHIM 0.119 /3.022mm
|
availability request (add quantity to basket, offer follows) | |||
190 | UKC1990 |
ADJUSTING SHIM 0.120"/3.048mm
|
availability request (add quantity to basket, offer follows) | |||
190 | UKC1991 |
ADJUSTING SHIM 0.121"/3.073mm
|
availability request (add quantity to basket, offer follows) | |||
190 | UKC1992 |
ADJUSTING SHIM 0.122"/3.098mm
|
CHF 10.50 | |||
190 | UKC1993 |
ADJUSTING SHIM 0.123"/3.124mm
|
CHF 10.50 | |||
190 | UKC1994 |
ADJUSTING SHIM 0.124"/3.149mm
|
CHF 10.50 | |||
190 | UKC1995 |
ADJUSTING SHIM 0.125"/3.175mm
|
CHF 10.50 | |||
190 | UKC1996 |
ADJUSTING SHIM 0.126"/3.200mm
|
CHF 10.50 | |||
190 | UKC1997 |
ADJUSTING SHIM 0.127"/3.225mm
|
availability request (add quantity to basket, offer follows) | |||
190 | UKC1998 |
ADJUSTING SHIM 0.128"/3.251mm
|
CHF 10.50 | |||
190 | UKC1999 |
ADJUSTING SHIM 0.129"/3.276mm
|
availability request (add quantity to basket, offer follows) | |||
190 | UKC2000 |
ADJUSTING SHIM 0.130"/3.302mm
|
availability request (add quantity to basket, offer follows) | |||
191 | 146594A |
CAM BUCKET STANDARD
|
8 | CHF 19.80 | ||
191 | 146594010 |
CAM FOLLOWER STAG & TR7 +010 O/S DIAMETER
|
a/r | + 010 Oversize | availability request (add quantity to basket, offer follows) | |
192 | 143867 |
CORE PLUG TYPE 28.77MM
|
2 | CHF 3.35 | ||
193 | UKC3195 |
GASKET - TRANSFER HOUSING - REAR OF HEAD PLATE
|
1 | CHF 7.60 | ||
195 | TKC1242 |
USE TKC1242U
|
1 | Rear of cylinder head, single water outlet | ||
195 | TKC1242U |
COVER PLATE WATER OUTLET
|
1 | Rear of cylinder head, single water outlet | availability request (add quantity to basket, offer follows) | |
196 | SH505061 |
SCREW 5/16" UNC X 3/4"
|
1 | CHF 0.90 | ||
197 | SH505071 |
SCREW 5/16" UNC X 7/8"
|
4 | CHF 0.60 | ||
198 | GHF301 |
WASHER 5/16 X 5/8 M8
|
5 | CHF 0.40 | ||
199 | 148394 |
ADAPTOR HEATER PIPE
|
1 | CHF 24.90 | ||
200 | UKC3163 |
PLUG OIL GALLERY
|
1 | rear | availability request (add quantity to basket, offer follows) | |
200 | ULC1298 |
PLUG OIL GALLERY
|
1 | rear - from (e) CG25001 on | availability request (add quantity to basket, offer follows) | |
NI | CCEP4BR |
ENGINE PAINT SATIN BLACK, BRUSH ON, 500ML
|
1 | CHF 44.30 |