FRONT CALIPERS

CAR IDENTIFICATION JENSEN INTERCEPTOR

When ordering parts, it is essential that your car is identified exactly, by model year and serial number. Since many part changes were made during model years, the car number, engine number and body number provide the only positive identification. Quite often a car's title will not show the correct model year. Before ordering parts, please use the space provided to copy the applicable numbers from your car. Use of these numbers is the best way to insure that you order and receive the correct parts. Wherever possible, we have listed part applications by car number. In some cases, we had to use the engine numbers or body numbers.

Chassis Prefixes are as follows:

Chassis Prefix	Drive	Engine	Model
128	RH	383 cu. in G Series	Int. III
		440 cu. in H Series
129	LH (Europe)	383 cu. in G Series	Int. III
		440 cu. in H Series
130	RH	383 cu. in E. Series	FF III (for engine & transmission breakdown refer Mk II)
131	RH	440 cu. in G Series	SP
		440 cu. in H Series
132	LH	440 cu. in G Series	SP
		440 cu. in H Series
133	LH (USA)	383 cu. in G Series	Int. III
		440 cu. in H Series
134	LH (USA)	440 cu. in H Series	SP
136	RH	440 cu. in J Series	Int. III
137	LH (Europe)	440 cu. in J Series	Int. III
138	RH	440 cu. in H Series	SP
140	LH (USA)	440 cu. in J Series	Int. III

Four Digit Prefixes - 1974 onwards

1. digit describes model type	2 = Interceptor
2. digit describes body style	2 = Saloon 3 = Convertible
3. digit desribes drive	1 = LHD USA 2 = LHD Europe 3 = LHD Europe 4 = RHD
4. digit describes market area	0 = USA, Austria, Switzerland, UK 1 = Germany, Australia 2 = France, Japan 3 = Belgium, Holland, New Zealand 4 = Hong Kong
4. digit prefixes do not include a model year

In Engine and Transmission Sections the columns are headed by engine series. Although these apply loosely to the year of vehicle manufacture, this cannot be relied upon and reference shoult be made to the identification pad on the cylinder block adjacent to the distributor.
H Series	1972
J Series	1973
Series 4	1974

The fitting of parts or accessories not approved by the manufacturer will invalidate the warranty.

Ill.no.	Partno.	Part	Quantity required	Info	Price
2	CT5474	PISTON BRAKE CALIPER SMALL, STAINLESS STEEL	4		CHF 72.95

Ill.no.	Partno.	Part	Quantity required	Info	Price
3	CT5337	FRONT BRAKE PAD WITHOUT SENSOR	2		CHF 129.00

Ill.no.	Partno.	Part	Quantity required	Info	Price
4	CT5473	BRAKE PISTON, FRONT, 2.248", STAINLESS STEEL	2		CHF 38.25

Ill.no.	Partno.	Part	Quantity required	Info	Price
7	93035	CLIP - PIN	2		CHF 0.75

Ill.no.	Partno.	Part	Quantity required	Info	Price
12	CT6246	TAB WASHER	2		CHF 1.25

Ill.no.	Partno.	Part	Quantity required	Info	Price
13	CT5456	FRONT CALIPER SERVICE KIT	1	incl. 13, 15, 16, 19 for both sides	CHF 55.40

Ill.no.	Partno.	Part	Quantity required	Info	Price
14	CT5456	FRONT CALIPER SERVICE KIT	1		CHF 55.40

Ill.no.	Partno.	Part	Quantity required	Info	Price
15	CT5456	FRONT CALIPER SERVICE KIT	1	incl. 13, 15, 16, 19 for both sides	CHF 55.40

Ill.no.	Partno.	Part	Quantity required	Info	Price
16	CT5456	FRONT CALIPER SERVICE KIT	1	incl. 13, 15, 16, 19 for both sides	CHF 55.40

Ill.no.	Partno.	Part	Quantity required	Info	Price
16	CT5456	FRONT CALIPER SERVICE KIT	1	incl. 13, 15, 16, 19 for both sides	CHF 55.40

Ill.no.	Partno.	Part	Quantity required	Info	Price
2	CT5474	PISTON BRAKE CALIPER SMALL, STAINLESS STEEL	4		CHF 72.95
3	CT5337	FRONT BRAKE PAD WITHOUT SENSOR	2		CHF 129.00
4	CT5473	BRAKE PISTON, FRONT, 2.248", STAINLESS STEEL	2		CHF 38.25
7	93035	CLIP - PIN	2		CHF 0.75
12	CT6246	TAB WASHER	2		CHF 1.25
13	CT5456	FRONT CALIPER SERVICE KIT	1	incl. 13, 15, 16, 19 for both sides	CHF 55.40
14	CT5456	FRONT CALIPER SERVICE KIT	1		CHF 55.40
15	CT5456	FRONT CALIPER SERVICE KIT	1	incl. 13, 15, 16, 19 for both sides	CHF 55.40
16	CT5456	FRONT CALIPER SERVICE KIT	1	incl. 13, 15, 16, 19 for both sides	CHF 55.40
16	CT5456	FRONT CALIPER SERVICE KIT	1	incl. 13, 15, 16, 19 for both sides	CHF 55.40