HEADLAMPS & FITTINGS

CAR IDENTIFICATION MG A

Year	Model	Numbers manufactured
September 1955 to May 1959	MGA 1500cc	10101 to 68,850
September 1958 to June 1960	MGA Twin Cam	501 to 2611
May 1959 to April 1961	MGA 1600cc	68,851 to 100,351
April 1961 to June 1962	MGA 1600cc MkII	100,352 to 109,070

BMC 'B' Series Engine Use(1953 to 1981)

Model	cc	Prefix	BHP/RPM	Torque
M.G. MGA	1489	BP15GB,15GB	68/5200	82
M.G. MGA	1489	15GD	72/5500	85
M.G. MGA 1600	1588	16GA	80/5600	87
MGA Twin Cam	1588	BC16GB	108/6700
M.G. MGA 1600 Mk2	1622	16GC	90/5500 97

MGA Serial Numbers

Engine Number

The engine number is stamped on a plate secured to the righthand side of the cylinder block...or it is stamped on a plate secured to the rear of the engine behind the cylinder block. (Twin Cam)

Car Number

The car number is stamped on a plate secured to the top lefthand side of the dash panel

Gearbox Number

The gearbox number is stamped on the top of the gearbox casing adjacent to the dipstick

Body Number

The body number is stamped on a plate secured to the bulkhead between the righthand bonnet hinge and the fuse block.

Rear Axle Number

The rear axle No is stamped on the front of the axle tube on the LH side next to the spring seat.

Identifying the MGA

There are only five variations of the MGA. The 1500cc, 1600cc, MkII, Twin Cam and 1600cc MkII De luxe. The Coupés were a variation of the Roadster and were not differentiated by the factory numbering system as to body style. The Twin Cam, a major undertaking at the time of its introduction, was identified separately while the De luxe, the most elusive of MGA models, was not distinctly identified. There are reliable production figures for all models except the De luxe.

The three major MGA models may be readily identified by their tail-lamp and grille configurations as well as their engine displacement.

A 1500cc will have the familiar single Lucas tail lamp, the flush style grille and no shroud or boot lid emblems. Four-wheel drum brakes were fitted to this model only.

Very early 1500ccs had different style gauge faces, an example of which can be found in the factory service manual and drivers handbook illustrations. The door rails on the first few cars were entirely of wood as were the cockpit rear corners. There are few of these seen today. The 1500's did not have the starter hump on the passenger toe board or the windscreen mounted hood clamp. The turn indicators were switched through a relay.

1600cc is differentiated by the dual rear lamp with separate turn lamps, larger round parking lamps with flat lenses and a '1600cc' marker on the cowl and rear boot lid. Disc brakes on the front greatly improved stopping power. The starter position was moved with the resulting hump on the passenger toe board.

The 1600cc MkII received the closest thing to a face lift an MGA ever got. The famous flat grille was replaced with the 'pre-crushed' version. The MkI Mini rear lamps appeared horizontally below the boot lid and the vinyl covered dash and cowl and 1600cc MkII badges were added. The chrome trim and dash escutcheon from the Coupé finished off the dash. Seat belt anchors were added to the chassis. 1600cc MkII De luxe cars used the Twin Cam chassis with the push rod 1622cc engine. Check all parts carefully, as MGA's have not always enjoyed the respect they do now, and parts have been freely exchanged with little regard for originality. When re-wiring your car, be sure to order the loom that fits your body type, not engine type.

Ill.no.	Partno.	Part	Quantity required	Info	Price
1	506372X	HEADLAMP ASSEMBLY 7" TRIPOD LHD NO PILOT, L58263	2	LHD	CHF 152.80
1	AEU1061A	HEADLAMP ASSY 7IN LHD	2	LHD	CHF 101.55

Ill.no.	Partno.	Part	Quantity required	Info	Price
3	LU555296	HEADLAMP UNIT, LUCAS STYLE TRIPOD, BPF, NO PILOT, LHD	2	LHD, RH dipping	CHF 117.30

Ill.no.	Partno.	Part	Quantity required	Info	Price
4	27H4146A	HEADLAMP UNIT, NO PILOT, PLAIN, 7", P45 LHD	2		CHF 59.75

Ill.no.	Partno.	Part	Quantity required	Info	Price
5	WPS4697	HEADLAMP UNIT, WIPAC HALOGEN H4, QUADOPTIC, NO PILOT, LHD	2		CHF 95.05
5	LULUB803	HEADLAMP LHD H4, PAIR 7", NO PILOT	1		CHF 168.00

Ill.no.	Partno.	Part	Quantity required	Info	Price
7	GLB414	BULB 12V 50/40W BPF	2	RHD, LH dipping	CHF 13.90

Ill.no.	Partno.	Part	Quantity required	Info	Price
8	GLB415	BULB 12V LHD BPF	2	LHD, RH dipping	CHF 16.15

Ill.no.	Partno.	Part	Quantity required	Info	Price
9	GLB410	BULB 12V 45/40W	2		CHF 3.10
9			2

Ill.no.	Partno.	Part	Quantity required	Info	Price
10	GLB2983	BULB 12V P45T HALOGN	2		CHF 18.00

Ill.no.	Partno.	Part	Quantity required	Info	Price
15	27H2333	LOOM HEADLAMP, SEALED BEAM, BPF	2	for BPF lamp unit	CHF 31.60

Ill.no.	Partno.	Part	Quantity required	Info	Price
16	501473	ADAPTOR FOR HEADLAMP	2	Lucar terminals for BPF lamp	CHF 44.65

Ill.no.	Partno.	Part	Quantity required	Info	Price
17	BAU2110	CABLE/CONNECTOR TO HEADLAMP WITHOUT PILOT	2	Lucar plug connector & cables	CHF 18.40

Ill.no.	Partno.	Part	Quantity required	Info	Price
20	3H2962	HEADLAMP RIM GASKET, RUBBER	2	both Types	CHF 8.30

Ill.no.	Partno.	Part	Quantity required	Info	Price
21	AB606021	SCREW PANHD NO6X1/4	6	Type 'A' Bucket; 3 Adjusters	CHF 1.20

Ill.no.	Partno.	Part	Quantity required	Info	Price
22	17H5205	RIM HEADLAMP RETAINER	2	Type 'A' Bucket; 3 Adjusters	CHF 50.20

Ill.no.	Partno.	Part	Quantity required	Info	Price
23	17H5394K	ADJUSTER KIT, HEADLAMP ALIGNMENT, 3 SCREW TYPE	2	Type 'A' Bucket; 3 Adjusters - 3 screws, 3 springs, 3 sleeves	CHF 11.05

Ill.no.	Partno.	Part	Quantity required	Info	Price
24	7H6838	HEADLAMP BOWL 3 SCREW	2	Type 'A' Bucket; 3 Adjusters	CHF 31.75

Ill.no.	Partno.	Part	Quantity required	Info	Price
25	3H1031	HEADLAMP GASKET 7"	2	Type 'A' Bucket; 3 Adjusters	CHF 8.25

Ill.no.	Partno.	Part	Quantity required	Info	Price
30	27H8263X	BUCKET BOWL & RIM, HEADLAMP	2	Type 'B' Bucket; 2 Adjusters	CHF 63.90

Ill.no.	Partno.	Part	Quantity required	Info	Price
31	515218A	RIM LAMP RETAINING, CHROME	2	Type 'B' Bucket; 2 Adjusters - chrome plated	CHF 17.05

Ill.no.	Partno.	Part	Quantity required	Info	Price
32	SML4	INTERIOR POT HEADLIGHT 7", L54521538	2	Type 'B' Bucket; 2 Adjusters	CHF 20.00
32	27H6481	PLASTIC HEADLAMP BACK	2	Type 'B' Bucket; 2 Adjusters - alternative to SML4 (Not supplied with bucket, bowl & rim 27H8263X)	CHF 66.50

Ill.no.	Partno.	Part	Quantity required	Info	Price
33	BHM7058	TRIMSCREW KIT- HEADLAMP	2	Type 'B' Bucket; 2 Adjusters - (Includes: 2 screws, 2 ferrules, 2 springs & 2 clips)	CHF 11.05

Ill.no.	Partno.	Part	Quantity required	Info	Price
34	SML3	BUCKET, HEADLAMP, 2 ADJUSTER TYPE, STEEL	2	Type 'B' Bucket; 2 Adjusters	CHF 35.25

Ill.no.	Partno.	Part	Quantity required	Info	Price
36	AB606021	SCREW PANHD NO6X1/4	6	Type 'B' Bucket; 2 Adjusters	CHF 1.20

Ill.no.	Partno.	Part	Quantity required	Info	Price
37	13H565	SEAL RUBBER HEADLAMP TO BODY	2	Type 'B' Bucket; 2 Adjusters - alternative, fit in pairs	CHF 7.80

Ill.no.	Partno.	Part	Quantity required	Info	Price
40	142001	HEADLAMP RIM, CHROME	2		CHF 50.40

Ill.no.	Partno.	Part	Quantity required	Info	Price
41	RTC465	SCREW, HEADLAMP RIM RETAINING	2		CHF 2.40

Ill.no.	Partno.	Part	Quantity required	Info	Price
42	37H7421A	SPIRE CLIP HEADLAMP RIM	2		CHF 6.40

Ill.no.	Partno.	Part	Quantity required	Info	Price
45	PMZ314	SCREW, 3/16" UNF X 7/8", PAN HEAD	8		CHF 2.00

Ill.no.	Partno.	Part	Quantity required	Info	Price
46	GHF306	WASHER 3/16 X 3/8 OD	8		CHF 0.80

Ill.no.	Partno.	Part	Quantity required	Info	Price
47	WL700101	WASHER SPRING 3/16	8		CHF 0.15

Ill.no.	Partno.	Part	Quantity required	Info	Price
48	GHF206	NUT 10.32UNF(5/16AF)	8		CHF 0.90

Ill.no.	Partno.	Part	Quantity required	Info	Price
1	506372X	HEADLAMP ASSEMBLY 7" TRIPOD LHD NO PILOT, L58263	2	LHD	CHF 152.80
1	AEU1061A	HEADLAMP ASSY 7IN LHD	2	LHD	CHF 101.55
3	LU555296	HEADLAMP UNIT, LUCAS STYLE TRIPOD, BPF, NO PILOT, LHD	2	LHD, RH dipping	CHF 117.30
4	27H4146A	HEADLAMP UNIT, NO PILOT, PLAIN, 7", P45 LHD	2		CHF 59.75
5	WPS4697	HEADLAMP UNIT, WIPAC HALOGEN H4, QUADOPTIC, NO PILOT, LHD	2		CHF 95.05
5	LULUB803	HEADLAMP LHD H4, PAIR 7", NO PILOT	1		CHF 168.00
7	GLB414	BULB 12V 50/40W BPF	2	RHD, LH dipping	CHF 13.90
8	GLB415	BULB 12V LHD BPF	2	LHD, RH dipping	CHF 16.15
9	GLB410	BULB 12V 45/40W	2		CHF 3.10
9			2
10	GLB2983	BULB 12V P45T HALOGN	2		CHF 18.00
15	27H2333	LOOM HEADLAMP, SEALED BEAM, BPF	2	for BPF lamp unit	CHF 31.60
16	501473	ADAPTOR FOR HEADLAMP	2	Lucar terminals for BPF lamp	CHF 44.65
17	BAU2110	CABLE/CONNECTOR TO HEADLAMP WITHOUT PILOT	2	Lucar plug connector & cables	CHF 18.40
20	3H2962	HEADLAMP RIM GASKET, RUBBER	2	both Types	CHF 8.30
21	AB606021	SCREW PANHD NO6X1/4	6	Type 'A' Bucket; 3 Adjusters	CHF 1.20
22	17H5205	RIM HEADLAMP RETAINER	2	Type 'A' Bucket; 3 Adjusters	CHF 50.20
23	17H5394K	ADJUSTER KIT, HEADLAMP ALIGNMENT, 3 SCREW TYPE	2	Type 'A' Bucket; 3 Adjusters - 3 screws, 3 springs, 3 sleeves	CHF 11.05
24	7H6838	HEADLAMP BOWL 3 SCREW	2	Type 'A' Bucket; 3 Adjusters	CHF 31.75
25	3H1031	HEADLAMP GASKET 7"	2	Type 'A' Bucket; 3 Adjusters	CHF 8.25
30	27H8263X	BUCKET BOWL & RIM, HEADLAMP	2	Type 'B' Bucket; 2 Adjusters	CHF 63.90
31	515218A	RIM LAMP RETAINING, CHROME	2	Type 'B' Bucket; 2 Adjusters - chrome plated	CHF 17.05
32	SML4	INTERIOR POT HEADLIGHT 7", L54521538	2	Type 'B' Bucket; 2 Adjusters	CHF 20.00
32	27H6481	PLASTIC HEADLAMP BACK	2	Type 'B' Bucket; 2 Adjusters - alternative to SML4 (Not supplied with bucket, bowl & rim 27H8263X)	CHF 66.50
33	BHM7058	TRIMSCREW KIT- HEADLAMP	2	Type 'B' Bucket; 2 Adjusters - (Includes: 2 screws, 2 ferrules, 2 springs & 2 clips)	CHF 11.05
34	SML3	BUCKET, HEADLAMP, 2 ADJUSTER TYPE, STEEL	2	Type 'B' Bucket; 2 Adjusters	CHF 35.25
36	AB606021	SCREW PANHD NO6X1/4	6	Type 'B' Bucket; 2 Adjusters	CHF 1.20
37	13H565	SEAL RUBBER HEADLAMP TO BODY	2	Type 'B' Bucket; 2 Adjusters - alternative, fit in pairs	CHF 7.80
40	142001	HEADLAMP RIM, CHROME	2		CHF 50.40
41	RTC465	SCREW, HEADLAMP RIM RETAINING	2		CHF 2.40
42	37H7421A	SPIRE CLIP HEADLAMP RIM	2		CHF 6.40
45	PMZ314	SCREW, 3/16" UNF X 7/8", PAN HEAD	8		CHF 2.00
46	GHF306	WASHER 3/16 X 3/8 OD	8		CHF 0.80
47	WL700101	WASHER SPRING 3/16	8		CHF 0.15
48	GHF206	NUT 10.32UNF(5/16AF)	8		CHF 0.90