Ill.no. | Partno. | Part | Quantity required | Info | Price | |
---|---|---|---|---|---|---|
1 | AEU1061A |
HEADLAMP ASSY 7IN LHD
|
2 | G-AN4, G-AN5, H-AN9, H-AN10, A-AN10 - LHD (not for Germany) | CHF 101.55 | |
1 | BAU1177A |
H/L ASSY EEC LHD+P
|
2 | G-AN4, G-AN5, H-AN9, H-AN10, A-AN10 - LHD, only Germany | CHF 92.40 | |
3 | 27H4146A |
HEADLAMP UNIT, NO PILOT, PLAIN, 7", P45 LHD
|
2 | CHF 59.75 | ||
3 | 27H5981A |
HEADLAMP UNIT 7", P45, WITH PILOT, LHD
|
2 | CHF 61.95 | ||
4 | GLB410 |
BULB 12V 45/40W
|
2 | 45/50 watt | CHF 3.10 | |
4 | 2 | 45/50 watt | ||||
4 | GLB2983 |
BULB 12V P45T HALOGN
|
2 | 60/55 watt | CHF 18.00 | |
6 | BAU2110 |
CABLE/CONNECTOR TO HEADLAMP WITHOUT PILOT
|
2 | CHF 18.40 | ||
7 | BAU2111 |
CABLE/CONNECTOR FOR SEALED BEAM HEADLAMP WITH PILOT
|
2 | CHF 29.70 | ||
8 | 27H5976 |
LOOM HEADLAMP, SEALED BEAM, WITH PILOT
|
1 | for P45T with pilot | CHF 26.65 | |
10 | GLB501 |
BULB 12V 5W CAPLESS
|
2 | fits BAU2111 only (No. 7) | CHF 0.75 | |
11 | GLB233 |
BULB 12V 4W
|
2 | fits 27H5976 only (No. 8) | CHF 2.05 | |
15 | 27H8263X |
BUCKET BOWL & RIM, HEADLAMP
|
2 | CHF 63.90 | ||
16 | BHM7058 |
TRIMSCREW KIT- HEADLAMP
|
2 | CHF 11.05 | ||
17 | 515218A |
RIM LAMP RETAINING
|
2 | CHF 18.75 | ||
18 | AB606021 |
SCREW PANHD NO6X1/4
|
6 | CHF 1.20 | ||
19 | SML4 |
INTERIOR POT HEADLIGHT 7", L54521538
|
2 | CHF 20.00 | ||
19 | 27H6481 |
PLASTIC HEADLAMP BACK
|
2 | CHF 66.50 | ||
20 | SML3 |
BUCKET, HEADLAMP, 2 ADJUSTER TYPE, STEEL
|
2 | with adjuster | CHF 35.25 | |
20 | SML3P |
BUCKET, HEADLAMP, PLASTIC
|
2 | with adjuster | CHF 56.65 | |
20 | SML3Z |
BUCKET, HEADLAMP, AFTERMARKET
|
2 | without adjuster | CHF 31.75 | |
21 | 009403 |
RUBBER GASKET LAMP POT, 2 PINS F.ADJUSTER
|
2 | CHF 12.25 | ||
22 | 500929 |
HEADLAMP RIM 7", L54520650
|
2 | G-AN4, G-AN5, H-AN9, H-AN10, A-AN10 | CHF 39.55 | |
22 | 500929ALLOY |
HEADLAMP RIM 7", ALUMINIUM
|
2 | G-AN4, G-AN5, H-AN9, H-AN10, A-AN10 | CHF 59.45 | |
23 | RTC465 |
SCREW, HEADLAMP RIM RETAINING
|
2 | G-AN4, G-AN5, H-AN9, H-AN10, A-AN10 | CHF 2.40 | |
24 | 21G9057 |
RUBBER WASHER
|
2 | G-AN4, G-AN5, H-AN9, H-AN10, A-AN10 | CHF 1.30 | |
25 | 37H7421A |
SPIRE CLIP HEADLAMP RIM
|
2 | G-AN4, G-AN5, H-AN9, H-AN10, A-AN10 | CHF 6.40 | |
26 | 57H5455 |
HEADLAMP RIM 1500
|
2 | G-AN6 - spring clip fitting | CHF 38.75 | |
27 | BAU1460 |
CLAMP HEADLIGHT RING, L54522243
|
2 | G-AN6 | CHF 10.80 | |
The headlamp units were attached to the front wings by more than one method. The most common method used was screws and nuts, this was replaced at a late date by the use of either self tapping screws or pop rivets. The latter was preferred by the production line for speed of assembly. | ||||||
30 | PMZ314 |
SCREW, 3/16" UNF X 7/8", PAN HEAD
|
8 | ‘screw & nut’ method | CHF 2.00 | |
31 | GHF306 |
WASHER 3/16 X 3/8 OD
|
16 | ‘screw & nut’ method | CHF 0.80 | |
32 | WL700101 |
WASHER SPRING 3/16
|
8 | ‘screw & nut’ method | CHF 0.15 | |
33 | GHF206 |
NUT 10.32UNF(5/16AF)
|
8 | ‘screw & nut’ method | CHF 0.90 | |
34 | AB610051 |
SELF TAPPING SCREW
|
8 | ‘self tapping screw’ method | CHF 0.75 | |
35 | WE702101 |
WASHER, SHAKEPROOF, 3/16"
|
8 | ‘self tapping screw’ method | CHF 0.75 | |
36 | 569313 |
RIVET SNAP HEAD
|
8 | ‘pop rivet’ method | CHF 1.90 |