Ill.no. | Partno. | Part | Quantity required | Info | Price | ||
---|---|---|---|---|---|---|---|
NI | REAR AXLE ASSY | 1 | Earlier BN1 series cars used the spiral bevel type axle described here, whereas later BN1s used the hypoid type. The most blatant distinguishing feature of the spiral bevel axle is that each wheel hub contains four studs, rather than the later five. | NA | |||
1 | CASE, rear axle | 1 | BN1 spiral bevel type | NA | |||
2 | 6K499 |
DRAIN PLUG
|
1 | CHF 4.95 | |||
3 | 21H6060 |
VALVE, BREATHER REAR AXLE CASING
|
1 | CHF 14.00 | |||
4 | CARRIER, gear | 1 | NA | ||||
5 | BOLT BEARING CAP | 4 | NA | ||||
6 | NUT | 4 | NA | ||||
7 | GHF303 |
WASHER 7/16 X 7/8 OD
|
4 | CHF 0.80 | |||
8 | GHF502 |
SPLITPIN 3/32 X1.5IN
|
4 | CHF 0.60 | |||
10 | 293-110 |
GASKET DIFFERENTIAL
|
1 | CHF 10.65 | |||
12 | STUD, for carrier | 10 | NA | ||||
13 | AJD8105Z |
NUT 5/16 BSF
|
10 | CHF 0.95 | |||
14 | GHF332 |
WASHER SPRING 5/16
|
10 | CHF 0.25 | |||
15 | AEK122 |
PLUG-WATER ELBOW
|
1 | CHF 23.05 | |||
16 | AAA836 |
FIBRE WASHER
|
1 | CHF 2.05 | |||
17 | CARRIER, differential | 1 | NA | ||||
18 | CHM163 |
BEARING DIFFERENTIAL CARRIER
|
2 | CHF 41.80 | |||
19 | 2K7993 |
SHIM BEARING PACKING 0.002"
|
a/r | CHF 5.75 | |||
19 | 2K7435 |
SHIM BEARING PACKING, 0.004"
|
a/r | CHF 5.90 | |||
19 | 6K503 |
SHIM B/AXLE .006
|
a/r | CHF 6.10 | |||
20 | GEAR, differential, (17 teeth) | 2 | Use with 17 tooth gear | NA | |||
21 | PINION, differential, (10 teeth) | 2 | Use with 17 tooth gear | NA | |||
22 | PIN, pinion | 1 | NA | ||||
23 | 6K842 |
DIFF PEG NCA
|
2 | availability request (add quantity to basket, offer follows) | |||
24 | THRUST WASHER | 2 | BN1 spiral bevel type | NA | |||
25 | CROWN WHEEL & PINION, 3.666:1, 9/33 | 1 | NA | ||||
26 | SCREW, ring gear to case | 8 | NA | ||||
27 | Federring | 4 | Nicht erhältlich | ||||
29 | 2A7213 |
BEARING PINION OUTER
|
1 | CHF 39.75 | |||
30 | 100897A |
PINION BEARING, INNER
|
1 | CHF 60.00 | |||
31 | 1B7240 |
SPACER DIFF BEARING
|
1 | CHF 86.95 | |||
32 | 675-300 |
SHIM, BEVEL PINION, 0.003"
|
a/r | availability request (add quantity to basket, offer follows) | |||
32 | 675-310 |
SHIM, BEVEL PINION, 0.005"
|
a/r | availability request (add quantity to basket, offer follows) | |||
35 | HOUSING, oil seal | 1 | NA | ||||
36 | 520-310 |
PINION OIL SEAL AH BN1
|
1 | CHF 5.15 | |||
37 | DUST COVER, oil seal | 1 | NA | ||||
38 | 697-470 |
GASKET PINION HOUSING
|
1 | CHF 7.95 | |||
39 | SCREW, housing to axle case | 4 | NA | ||||
40 | GHF331 |
WASHER SPRING 1/4
|
4 | CHF 0.55 | |||
41 | FLANGE, propeller shaft | 1 | NA | ||||
42 | 311-290 |
NUT, BEVEL PINION
|
1 | availability request (add quantity to basket, offer follows) | |||
43 | LOCK TAB | 1 | NA | ||||
44 | 031-392 |
AXLE SHAFT
|
2 | CHF 622.20 | |||
45 | 1G4193 |
GASKET REAR HUB
|
2 | CHF 3.30 | |||
46 | SCREW, shaft to hub | 2 | NA | ||||
47 | ATC7240 |
HOUSING INNER REAR HUB BEARING AH BN1 SPIRAL BEVEL
|
1 | availability request (add quantity to basket, offer follows) | |||
48 | 675-400 |
STUD WHEEL AH
|
8 | CHF 16.80 | |||
49 | 1B7376 |
NUT, 7/16" BSF
|
8 | CHF 17.95 | |||
50 | GHB127 |
BEARING REAR A&B BANJO
|
2 | CHF 35.45 | |||
51 | GHS211 |
OIL SEAL MGA/B BANJO
|
2 | CHF 7.25 | |||
52 | 1G7304 |
NUT AXLE TUBE
|
2 | CHF 39.65 | |||
53 | 1G7584 |
WASHER, LOCKING
|
2 | CHF 6.90 | |||
54 | 664-030 |
HUB WIRE WHEEL REAR LH
|
1 | CHF 139.65 | |||
54 | 664-020 |
HUB WIRE WHEEL REAR. RH
|
1 | CHF 139.65 | |||
55 | AHH7318 |
KNOCK-ON 2 EAR 12TPI LH PLAIN CENTER CAP
|
2 | CHF 65.85 | |||
55 | AHH7317 |
KNOCK-ON 2 EAR 12TPI RH PLAIN CENTER CAP
|
2 | CHF 65.85 |