REAR AXLE

CAR IDENTIFICATION TR5 - TR6

Before ordering any parts for your TR sports car, it is essential that you have full details of the chassis number, engine number, body number, rear axle and gearbox numbers.

Number Locations

Commission/Chassis Number	The commission number on TR5-250 and early TR6 models were mounted on plates affixed to the top of the inner lefthand front wing. The plate included the commission number which could have a suffix 'L' or 'U' (1971 on) for lefthand drive models, and 'O' for overdrive. Paint & trim colour codes were also shown.
	Later TR6 models had the commission plate attached to the lefthand 'B' post, below the door shut plate.
Body Number	Two plates attached to the bulkhead were body numbers. One was fitted by the manufacturers of the body shell, the other by Triumph. These numbers are not required when ordering replacement parts.
Engine Number	The engine number was stamped onto a lip at the rear of the lefthand side of all engine blocks, just visible below the spark plug. The engine number is essential when ordering engine parts.
Gearbox Number	The gearbox number is stamped onto the casing just behind the clutch lever cross- haft box. On later US models the number was stamped above the starter motor bulge on the righthand side of the gearbox casing. Use this number when ordering gearbox parts.
Rear Axle Number	The rear axle number is located at the base of the axle housing, when viewed from beneath the car. Use this number when ordering axle parts.

TR5 Pi Models
1967	CP1	Prototype
	CP2	First production car, (built 29th August 1967)
	CP585	Last production car that year
1968	CP586	First production car, (built 1st January 1968)
	CP3101	Last production car, (built 19th September 1968)

TR250 Carburettor Models
1967	CD1-L	First production car, (built on 11th July 1967)
	CD2684 L	Last production car that year
1968	CD2685 L	First production car
	CD8594 L	Last production car, (built 19th September 1968)

TR6 Pi Models
1968	1969 model year
	CP25156	First production car, (built 28th November 1968)
	CP25158	Last production car that year
	CP25001	First car was probably a prototype
	CKD	CP25002 To CP25145 were CKD
1969	1969 model year
	CP25159	First production car, (built 2nd January 1969)
	CP26998	Last production car, (built 10th September 1968)
	1970 model year
	CP50001	First production car, (built 1st September 1969)
	CP50464	Last production car that year
	CKD	CP50002 To CP50436 believed to be CKD
1970	1970 model year
	CP50465	First production car, (built 1st January 1970)
	CP52785	Last production car that year
1971	1971 model year
	CP52786	First production car, (built 1st January 1971)
	CP54572	Last production car, (built 7th September 1971)
	CKD	CP54573 To CP54584 were CKD cars
	1972 model year
	CP75001	First production car, (built 27th September 1971)
	CP7544	Last production car that year
1972	1972 model year
	CP75455	First production car, (built 3rd January 1972)
	CP77718	Last production car, (built 21st September 1972)
	1973 model year
	CR169	First production car, (built 15th November 1972)
	CR664	Last production car that year
	CKD	CR1 to CR168 were CKD cars
1973	1973 model year
	CR665	First production car, (built on 2nd January 1973)
	CR2911	Last production car, (built 17th October 1973)
	1974 model year
	CR5049	First production car, (built 14th September 1973)
	CR5612	Last production car that year
	CKD	CR5001 To CR5048 were CKD cars
1974	1974 model year
	CR5613	First production car, (built 1st January 1974)
	CR6630	Last production car that year
1975	1974 model year
	CR6631	First production car, (built 1st January 1975)
	CR6701	Last production car, (built 7th February 1975)

TR6 Carburettor Models
1968	1969 model year
	CC25003 L	First production car, (built 19th September 1968)
	CC27383 L	Last production car that year
	CC25001 & CC25002	Not yet found in factory build records
1969	1969 model year
	CC27384 L	First production car, (built 2nd January 1969)
	CC32142 L	Last production car, (built 19th December 1969)
	1970 model year
	CC50001 L	First production car, (built 22nd November 1969)
	CC51032 L	Last production car that year
1970	1970 model year
	CC51033 L	First production car, (built 1st January 1970)
	CC60902 L	Last production car that year
1971	1971 model year
	CC60903 L	First production car, (built 1st January 1971)
	CC67893 L	Last production car, (built 20th August 1971)
	1972 model year
	CC75001 L	First production car, (built 20th August 1971)
	CC7881	Last production car that year
1972	1972 model year
	CC78813 U	First production car, (built 3rd January 1972)
	CC85737 U	Last production car, (built 5th October 1972)
	1973 model year
	CF1 U	First production car, (built 11th September 1972)
	CF 4028 U	Last production car that year
1973	1973 model year
	CF4029 U	First production car, (built 2nd January 1973)
	CF17002 U	Last production car that year
1974	1974 model year
	CF17002 U	First production car, (built 2nd January 1974)
	CF25777 U	Last production car, (built 18th September 1974)
	1975 model year
	CF27001 U	First production car, (built 22nd August 1974)
	CF29580 U	Last production car that year
1975	1975 model year
	CF29581 U	First production car, (built 2nd January 1975)
	CF39991 U	Last production car, (built 23rd August 1975)
	1976 model year
	CF50001 U	First production car, (built 29th August 1975)
	CF52314 U	Last production car that year
1976	1976 model year
	CF52315 U	First production car, (built 5th January 1976)
	CF58328 U	Last production TR6, (built 15th July 1976)

Ill.no.	Partno.	Part	Quantity required	Info	Price
1	312060RX	DIFF 3.7 NEW CWP EX	1	TR250 fitted to axle No. CTC6241	availability request (add quantity to basket, offer follows)
1	312060RLX	DIFF 3.7 NEW CWP+LSD	1	New crown wheel & pinion, limited slip differential, recon/exch - TR250 fitted to axle No. CTC6241	availability request (add quantity to basket, offer follows)

Ill.no.	Partno.	Part	Quantity required	Info	Price
2	141360	REAR COVER DIFF IRS	1	TR250 fitted to axle No. CTC6241	availability request (add quantity to basket, offer follows)

Ill.no.	Partno.	Part	Quantity required	Info	Price
3	308223	USE 149826X	1	TR250 fitted to axle No. CTC6241

Ill.no.	Partno.	Part	Quantity required	Info	Price
4	143712	STUD FRONT SUSPENSION	4	TR250 fitted to axle No. CTC6241	CHF 8.75

Ill.no.	Partno.	Part	Quantity required	Info	Price
5	WP48	WASHER, PLAIN, 3/8" ID X 3/4" OD	4	TR250 fitted to axle No. CTC6241	CHF 1.55

Ill.no.	Partno.	Part	Quantity required	Info	Price
6	GHF333	WASHER SPRING 3/8	4	TR250 fitted to axle No. CTC6241	CHF 0.35

Ill.no.	Partno.	Part	Quantity required	Info	Price
7	GHF223	NUT 3/8 UNF NYLOC	4	TR250 fitted to axle No. CTC6241	CHF 0.85

Ill.no.	Partno.	Part	Quantity required	Info	Price
8	312061RX	DIFF ASSY NEW CROWN WHEEL & PINION	1	TR5, TR6 Pi models - New crown wheel & pinion, recon.exch.	availability request (add quantity to basket, offer follows)
8	312061RLX	R/AXLE 3.45:1	1	TR5, TR6 Pi models - New crown wheel & pinion, limited slip differential, recon/exch.	availability request (add quantity to basket, offer follows)
8	312060RX	DIFF 3.7 NEW CWP EX	1	TR250 fitted from rear axle No. CTC6242 TR6 carburettor models	availability request (add quantity to basket, offer follows)
8	312060R	DIFF 3.7:1 TR6 COU USED CROWN WHEEL & PINION	1	TR250 fitted from rear axle No. CTC6242 TR6 carburettor models - Used crown wheel & pinion, recon/exch	availability request (add quantity to basket, offer follows)
8	312060RX	DIFF 3.7 NEW CWP EX	1	TR250 fitted from rear axle No. CTC6242 TR6 carburettor models - New crown wheel & pinion, recon/exch	availability request (add quantity to basket, offer follows)
8	312060RLX	DIFF 3.7 NEW CWP+LSD	1	TR250 fitted from rear axle No. CTC6242 TR6 carburettor models - New crown wheel & pinion, limited slip differential, recon/exch	availability request (add quantity to basket, offer follows)

Ill.no.	Partno.	Part	Quantity required	Info	Price
9	149826	DIFF REAR CASE COVER TR5/6	1	TR250 fitted to rear axle No. CTC6241, TR5, TR6	availability request (add quantity to basket, offer follows)

Ill.no.	Partno.	Part	Quantity required	Info	Price
10	51K3424	WISHBONE PLUG	1	TR250 fitted to rear axle No. CTC6241, TR5, TR6	CHF 2.40

Ill.no.	Partno.	Part	Quantity required	Info	Price
11	GHF502	SPLITPIN 3/32 X1.5IN	1	TR250 fitted to rear axle No. CTC6241, TR5, TR6	CHF 0.60

Ill.no.	Partno.	Part	Quantity required	Info	Price
12	149816X	COVER DIFF	1	alloy	availability request (add quantity to basket, offer follows)

Ill.no.	Partno.	Part	Quantity required	Info	Price
13	GHF103	SCREW 5/16 UNF X 1IN	8		CHF 0.90

Ill.no.	Partno.	Part	Quantity required	Info	Price
14	GHF332	WASHER SPRING 5/16	8		CHF 0.25

Ill.no.	Partno.	Part	Quantity required	Info	Price
15	134480	GASKET, REAR COVER TO CASE	1		CHF 3.85

Ill.no.	Partno.	Part	Quantity required	Info	Price
16	305815	DIFFERENTIAL HOUSING	1		availability request (add quantity to basket, offer follows)

Ill.no.	Partno.	Part	Quantity required	Info	Price
17	100878	SET SCREW AXLE BEARING CAP	4		availability request (add quantity to basket, offer follows)

Ill.no.	Partno.	Part	Quantity required	Info	Price
18	GHF333	WASHER SPRING 3/8	4		CHF 0.35

Ill.no.	Partno.	Part	Quantity required	Info	Price
19	DP508	DOWEL, REAR COVER LOCATING	2		CHF 5.00

Ill.no.	Partno.	Part	Quantity required	Info	Price
20	114774	PLUG, OIL FILLER, TAPERED	1	alternatives	CHF 10.35
20	22G2115	DRAIN PLUG, TAPERED, 3/8" BSPT	1	alternatives	CHF 6.00

Ill.no.	Partno.	Part	Quantity required	Info	Price
21	211793Z	PLATE, DIFFERENTIAL MOUNT, FRONT	1		CHF 213.00

Ill.no.	Partno.	Part	Quantity required	Info	Price
22	140007	WASHER NCA	1	welded to plate, (211793Z)	availability request (add quantity to basket, offer follows)

Ill.no.	Partno.	Part	Quantity required	Info	Price
23	132856	BOLT 7/16 UNF	4		CHF 29.95

Ill.no.	Partno.	Part	Quantity required	Info	Price
24	GHF324	WASHER STAR INT 7/16	4		CHF 0.45

Ill.no.	Partno.	Part	Quantity required	Info	Price
25	114774	PLUG, OIL FILLER, TAPERED	1		CHF 10.35
25	22G2115	DRAIN PLUG, TAPERED, 3/8" BSPT	1	alternative	CHF 6.00

Ill.no.	Partno.	Part	Quantity required	Info	Price
26	516398	CROWN WHEEL & PINION 3.45:1 TR5/6PI	1	TR5, TR6 to CP52867	CHF 524.00
26	502127	CROWN WHEEL & PINION 3.7:1 TR2-6	1	TR250, TR6 to CC61570	CHF 524.00
26	505014	CROWN WHEEL & PINION 4.1:1 TR2-6	1	European models: TR5, TR6 to CP52867, North American models: TR250, TR6 to CC61570	CHF 539.85
26	502523	CROWNWHEEL&PINION TR2-6	1	European models: TR5, TR6 to CP52867, North American models: TR250, TR6 to CC61570	CHF 664.80
26	503924	CROWNWHEEL&PINION 4,55:1	1	European models: TR5, TR6 to CP52867, North American models: TR250, TR6 to CC61570	CHF 664.80
26	515709	CROWN WHEEL &PINION TR2-6. 4.875:1 NCA	1	European models: TR5, TR6 to CP52867, North American models: TR250, TR6 to CC61570	availability request (add quantity to basket, offer follows)
26	516398	CROWN WHEEL & PINION 3.45:1 TR5/6PI	1	TR6 From CP52868	CHF 524.00
26	502127	CROWN WHEEL & PINION 3.7:1 TR2-6	1	TR6 From CC61571	CHF 524.00

Ill.no.	Partno.	Part	Quantity required	Info	Price
27	100846	SPACER, SOLID, BETWEEN PINION BEARINGS	1	TR5, TR250, TR6 to CP52867/CC61570	CHF 59.85

Ill.no.	Partno.	Part	Quantity required	Info	Price
28	100562	SHIM 0.003"	a/r	TR5, TR250, TR6 to CP52867/CC61570	CHF 4.30
28	100563	SHIM 0.005"	a/r	TR5, TR250, TR6 to CP52867/CC61570	CHF 4.30
28	100564	SHIM 0.010"	a/r	TR5, TR250, TR6 to CP52867/CC61570	CHF 4.30
28	140793	SHIM 0.003"	a/r	TR5, TR250, TR6 to CP52867/CC61570	CHF 9.15
28	140792	SHIM 0.005"	a/r	TR5, TR250, TR6 to CP52867/CC61570	CHF 9.15
28	140791	SHIM 0.010"	a/r	TR5, TR250, TR6 to CP52867/CC61570	CHF 9.15

Ill.no.	Partno.	Part	Quantity required	Info	Price
29	156903	SPACER BEARING CROWN WHEEL & PINION	1	TR6 from CP52868/CC61571	CHF 26.90

Ill.no.	Partno.	Part	Quantity required	Info	Price
30	100897A	PINION BEARING, INNER	1		CHF 60.00

Ill.no.	Partno.	Part	Quantity required	Price
31	100965/3	SHIM, 0.003"	a/r	CHF 5.90
31	1009665	SHIM, 0.005"	a/r	CHF 2.10
31	100967/10	SHIM, 0.005"	a/r	CHF 5.50

Ill.no.	Partno.	Part	Quantity required	Info	Price
32	516398SHIM	SHIM PINION HEAD	a/r		CHF 15.35

Ill.no.	Partno.	Part	Quantity required	Info	Price
33	100422	BEARING, DIFFERENTIAL PINION, OUTER	1	original spec	CHF 143.30
33	100422TIM	BEARING, DIFFERENTIAL PINION, OUTER	1	alternative spec	CHF 67.05

Ill.no.	Partno.	Part	Quantity required	Info	Price
34	140337	OIL SEAL DIFF NOSE	1		CHF 14.35

Ill.no.	Partno.	Part	Quantity required	Info	Price
35	160275	PINION FLANGE IRS	1	all IRS models	CHF 179.20

Ill.no.	Partno.	Part	Quantity required	Info	Price
36	2A7323	WASHER PLAIN	1	TR5, TR250, TR6 to CP52868/CC61571	CHF 8.40

Ill.no.	Partno.	Part	Quantity required	Info	Price
37	112635	NUT SLOTTED 5/8 UNF	1	TR5, TR250, TR6 to CP52867/CC61570	CHF 24.20

Ill.no.	Partno.	Part	Quantity required	Info	Price
38	EAW4321	WIRE TIE, BINDING, X14IN	1	TR5, TR250, TR6 to CP52867/CC61570	CHF 1.25

Ill.no.	Partno.	Part	Quantity required	Info	Price
39	510618A	NUT NYLOCK SPECIAL	1	TR6 From CP52868/CC61571	CHF 5.25

Ill.no.	Partno.	Part	Quantity required	Info	Price
40	UKC725	SHIELD DIFF PINION NUT	1	TR6 from CP52868/CC61571	availability request (add quantity to basket, offer follows)

Ill.no.	Partno.	Part	Quantity required	Info	Price
41	302155	DIFFERENTIAL CARRIER UNIT TR34A NCA	1		availability request (add quantity to basket, offer follows)

Ill.no.	Partno.	Part	Quantity required	Info	Price
42	118977A	LOCKWASHER 3/8"	10		CHF 1.55

Ill.no.	Partno.	Part	Quantity required	Info	Price
43	110737	BOLT, RING GEAR TO CARRIER, 3/8"	10		CHF 2.15

Ill.no.	Partno.	Part	Quantity required	Info	Price
44	110515	BEARING, DIFFERENTIAL CARRIER, HIGH QUALITY	2	'Timken'	CHF 167.00
44	110515Z	BEARING, DIFFERENTIAL CARRIER	2	alternative	CHF 50.65

Ill.no.	Partno.	Part	Quantity required	Price
45	100894/3	SHIM, DIFFERENTIAL CARRIER BEARING, 0.003"	a/r	CHF 4.60
45	100895/5	SHIM, DIFFERENTIAL CARRIER BEARING, 0.005"	a/r	CHF 2.10
45	100896/10	SHIM, DIFFERENTIAL CARRIER BEARING, 0.010"	a/r	CHF 2.10

Ill.no.	Partno.	Part	Quantity required	Info	Price
46	113187	USE 153384	2	16 teeth, plain - fit in pairs, alternative to 153384
46	153384	DIFFERENTIAL SUN GEAR 16 TOOTH	2	16 teeth, with machined groove - fit in pairs, alternative to 113187	availability request (add quantity to basket, offer follows)

Ill.no.	Partno.	Part	Quantity required	Info	Price
47	102801	THRUST WASHER DIFFERENTIAL, 0.048"	2		CHF 12.00

Ill.no.	Partno.	Part	Quantity required	Info	Price
48	113188	GEAR, DIFFERENTIAL, PLANET, 10 TEETH, PLAIN	2	10 teeth, plain - fit in pairs, alternative to 153385	CHF 44.15
48	153385	USE 113188	2	10 teeth, with machined groove - fit in pairs, alternative to 113188

Ill.no.	Partno.	Part	Quantity required	Info	Price
49	056793	USE 139951	a/r	0.046/0.049"
49	142165	USE 139951	a/r	0.049/0.051"
49	139951	THRUST WASHER, 0.051-0.053"	a/r	0.051/0.053"	CHF 16.80
49	142166	USE 139952	a/r	0.053/0.055"
49	139952	THRUST WASHER, 0.055-0.057"	a/r	0.055/0.057"	CHF 19.25
49	160373	THRUST DIFF PIN.058	a/r	0.057/0.059"	CHF 18.15
49	139953	THRUST WASHER, 0.059-0.061"	a/r	0.059/0.061"	CHF 19.25
49	160374	THRUST DIFF PIN.062	a/r	0.061/0.063"	CHF 18.55
49	139954	THRUST WASHER, 0.063-0.065"	a/r	0.063/0.065"	CHF 18.20
49	160375	THRUST DIFF PIN.066	a/r	0.065/0.067"	CHF 18.15
49	139955	THRUST WASHER, 0.067-0.069"	a/r	0.067/0.069"	CHF 16.80
49	160376	THRUST WASHER 0.070	a/r	0.069/0.071"	CHF 16.80
49	139956	THRUST WASHER, 0.071-0.073"	a/r	0.071/0.073"	CHF 16.80

Ill.no.	Partno.	Part	Quantity required	Info	Price
50	100844	SHAFT, PINION GEAR	1		CHF 45.80

Ill.no.	Partno.	Part	Quantity required	Info	Price
51	111215	LOCATING PIN DIFF	1		CHF 12.80

Ill.no.	Partno.	Part	Quantity required	Info	Price
52	TT2220	LIMITED SLIP DIFFERENTIAL, QUAIFE TORQUE SENSING	1		CHF 1'800.00
52	TT2221	LIMITED SLIP DIFFERENTIAL, PLATE TYPE, IRS-AXLE	1		CHF 1'859.00

Ill.no.	Partno.	Part	Quantity required	Info	Price
53	149378	AXLE SHAFT	1	uses nyloc nut	availability request (add quantity to basket, offer follows)
53	149379	USE 149379SR	1	uses nyloc nut
53	UKC4862	INNER AXLE SHAFT LH	1	alternative, uses castle nut	availability request (add quantity to basket, offer follows)
53	149379SR	AXLE SHAFT TR6 INNER RH	1	alternative, uses castle nut	availability request (add quantity to basket, offer follows)

Ill.no.	Partno.	Part	Quantity required	Info	Price
54	134465	BEARING DIFF & OVERDRIVE	2		CHF 28.35

Ill.no.	Partno.	Part	Quantity required	Info	Price
55	128638	HOUSING, AXLE SHAFT, OIL SEAL	2		CHF 32.15

Ill.no.	Partno.	Part	Quantity required	Info	Price
56	138523	OIL SEAL, AXLE SHAFT, INNER	2		CHF 6.10

Ill.no.	Partno.	Part	Quantity required	Info	Price
57	SH605061	SCREW 5/16" UNF X 3/4"	8		CHF 0.65

Ill.no.	Partno.	Part	Quantity required	Info	Price
58	GHF332	WASHER SPRING 5/16	8		CHF 0.25

Ill.no.	Partno.	Part	Quantity required	Info	Price
59	149409	DRIVE FLANGE	2		CHF 83.65

Ill.no.	Partno.	Part	Quantity required	Info	Price
60	134450	STONEGUARD DRIVESHAFT, WELDED TO FLANGE	2		availability request (add quantity to basket, offer follows)

Ill.no.	Partno.	Part	Quantity required	Info	Price
61	143280	KEY, INNER FLANGE TO INNER AXLE SHAFT	2		CHF 17.70

Ill.no.	Partno.	Part	Quantity required	Info	Price
62	2A7323	WASHER PLAIN	2		CHF 8.40

Ill.no.	Partno.	Part	Quantity required	Info	Price
63	138563	NUT NYLOC REAR HUB	2		CHF 40.10

Ill.no.	Partno.	Part	Quantity required	Info	Price
64	21A79	NUT SLOTTED 5/8 UNF	2		CHF 8.10

Ill.no.	Partno.	Part	Quantity required	Info	Price
65	GHF504	SPLITPIN 1/8 X 2IN	2		CHF 0.55

Ill.no.	Partno.	Part	Quantity required	Info	Price
66	312061K	REBUILD KIT, DIFFERENTIAL	1	incl. 15, 30, 33, 34, 44, 54, 56	CHF 214.00

Ill.no.	Partno.	Part	Quantity required	Info	Price
67	312061FK	REAR AXLE MOUNTING KIT	1	Includes rubber front mountings	CHF 103.00
67	SPK13AM	MOUNTING KIT, REAR AXLE, POLYURETHANE	1	Includes polyurethane front mountings	CHF 206.25

Ill.no.	Partno.	Part	Quantity required	Info	Price
68	147783	MOUNTING REAR DIFF, RUBBER	2		CHF 32.25
	147783SPK	MOUNTING SET, DIFFERENTIAL, REAR, POLYURETHANE	1	Kit includes: 2 bushes, 2 tubes, 2 washers & 2 nuts	CHF 133.50

Ill.no.	Partno.	Part	Quantity required	Info	Price
69	BH605111	BOLT 5/16UNFX1 3/8	4		CHF 2.45

Ill.no.	Partno.	Part	Quantity required	Info	Price
70	WM58	WASHER, PLAIN, 5/16" ID X 3/4" OD	4		CHF 0.95

Ill.no.	Partno.	Part	Quantity required	Info	Price
71	GHF272	NUT 5/16UNF NYLOC TN	4		CHF 1.85

Ill.no.	Partno.	Part	Quantity required	Info	Price
72	134234	WASHER, SPECIAL, AXLE MOUNTING	4		CHF 5.65

Ill.no.	Partno.	Part	Quantity required	Info	Price
73	GHF273	NUT 3/8 UNF NYLOC TN	4		CHF 1.05

Ill.no.	Partno.	Part	Quantity required	Info	Price
74	134235	BUSH, DIFFERENTIAL MOUNTING, CONE, RUBBER	2		CHF 6.05
74	134235SPK	BUSH SET, DIFFERENTIAL MOUNTING, CONE, POLYURETHANE	1		CHF 83.10

Ill.no.	Partno.	Part	Quantity required	Info	Price
75	134236	BUSH, DIFFERENTIAL MOUNTING, CUP, RUBBER	2		CHF 6.05
75	134236SPK	BUSH SET, DIFFERENTIAL MOUNTING, CUP, POLYURETHANE	1		CHF 70.60

Ill.no.	Partno.	Part	Quantity required	Info	Price
76	134234	WASHER, SPECIAL, AXLE MOUNTING	4		CHF 5.65

Ill.no.	Partno.	Part	Quantity required	Info	Price
77	GHF273	NUT 3/8 UNF NYLOC TN	4		CHF 1.05

Ill.no.	Partno.	Part	Quantity required	Info	Price
78	140009K	REINFORCEMENT KIT, AXLE MOUNTING, FRONT	1	Includes reinforcements & mounting pin	CHF 99.95

Ill.no.	Partno.	Part	Quantity required	Info	Price
79	147400	PIN DIFF MOUNTING REAR	1		CHF 24.85

Ill.no.	Partno.	Part	Quantity required	Info	Price
80	147400RK	REINFORCMENT KIT REAR X MEMBER	2	Includes reinforcements & mounting pin	CHF 71.90

Ill.no.	Partno.	Part	Quantity required	Info	Price
81	147400	PIN DIFF MOUNTING REAR	2		CHF 24.85

Ill.no.	Partno.	Part	Quantity required	Info	Price
1	312060RX	DIFF 3.7 NEW CWP EX	1	TR250 fitted to axle No. CTC6241	availability request (add quantity to basket, offer follows)
1	312060RLX	DIFF 3.7 NEW CWP+LSD	1	New crown wheel & pinion, limited slip differential, recon/exch - TR250 fitted to axle No. CTC6241	availability request (add quantity to basket, offer follows)
2	141360	REAR COVER DIFF IRS	1	TR250 fitted to axle No. CTC6241	availability request (add quantity to basket, offer follows)
3	308223	USE 149826X	1	TR250 fitted to axle No. CTC6241
4	143712	STUD FRONT SUSPENSION	4	TR250 fitted to axle No. CTC6241	CHF 8.75
5	WP48	WASHER, PLAIN, 3/8" ID X 3/4" OD	4	TR250 fitted to axle No. CTC6241	CHF 1.55
6	GHF333	WASHER SPRING 3/8	4	TR250 fitted to axle No. CTC6241	CHF 0.35
7	GHF223	NUT 3/8 UNF NYLOC	4	TR250 fitted to axle No. CTC6241	CHF 0.85
8	312061RX	DIFF ASSY NEW CROWN WHEEL & PINION	1	TR5, TR6 Pi models - New crown wheel & pinion, recon.exch.	availability request (add quantity to basket, offer follows)
8	312061RLX	R/AXLE 3.45:1	1	TR5, TR6 Pi models - New crown wheel & pinion, limited slip differential, recon/exch.	availability request (add quantity to basket, offer follows)
8	312060RX	DIFF 3.7 NEW CWP EX	1	TR250 fitted from rear axle No. CTC6242 TR6 carburettor models	availability request (add quantity to basket, offer follows)
8	312060R	DIFF 3.7:1 TR6 COU USED CROWN WHEEL & PINION	1	TR250 fitted from rear axle No. CTC6242 TR6 carburettor models - Used crown wheel & pinion, recon/exch	availability request (add quantity to basket, offer follows)
8	312060RX	DIFF 3.7 NEW CWP EX	1	TR250 fitted from rear axle No. CTC6242 TR6 carburettor models - New crown wheel & pinion, recon/exch	availability request (add quantity to basket, offer follows)
8	312060RLX	DIFF 3.7 NEW CWP+LSD	1	TR250 fitted from rear axle No. CTC6242 TR6 carburettor models - New crown wheel & pinion, limited slip differential, recon/exch	availability request (add quantity to basket, offer follows)
9	149826	DIFF REAR CASE COVER TR5/6	1	TR250 fitted to rear axle No. CTC6241, TR5, TR6	availability request (add quantity to basket, offer follows)
10	51K3424	WISHBONE PLUG	1	TR250 fitted to rear axle No. CTC6241, TR5, TR6	CHF 2.40
11	GHF502	SPLITPIN 3/32 X1.5IN	1	TR250 fitted to rear axle No. CTC6241, TR5, TR6	CHF 0.60
12	149816X	COVER DIFF	1	alloy	availability request (add quantity to basket, offer follows)
13	GHF103	SCREW 5/16 UNF X 1IN	8		CHF 0.90
14	GHF332	WASHER SPRING 5/16	8		CHF 0.25
15	134480	GASKET, REAR COVER TO CASE	1		CHF 3.85
16	305815	DIFFERENTIAL HOUSING	1		availability request (add quantity to basket, offer follows)
17	100878	SET SCREW AXLE BEARING CAP	4		availability request (add quantity to basket, offer follows)
18	GHF333	WASHER SPRING 3/8	4		CHF 0.35
19	DP508	DOWEL, REAR COVER LOCATING	2		CHF 5.00
20	114774	PLUG, OIL FILLER, TAPERED	1	alternatives	CHF 10.35
20	22G2115	DRAIN PLUG, TAPERED, 3/8" BSPT	1	alternatives	CHF 6.00
21	211793Z	PLATE, DIFFERENTIAL MOUNT, FRONT	1		CHF 213.00
22	140007	WASHER NCA	1	welded to plate, (211793Z)	availability request (add quantity to basket, offer follows)
23	132856	BOLT 7/16 UNF	4		CHF 29.95
24	GHF324	WASHER STAR INT 7/16	4		CHF 0.45
25	114774	PLUG, OIL FILLER, TAPERED	1		CHF 10.35
25	22G2115	DRAIN PLUG, TAPERED, 3/8" BSPT	1	alternative	CHF 6.00
26	516398	CROWN WHEEL & PINION 3.45:1 TR5/6PI	1	TR5, TR6 to CP52867	CHF 524.00
26	502127	CROWN WHEEL & PINION 3.7:1 TR2-6	1	TR250, TR6 to CC61570	CHF 524.00
26	505014	CROWN WHEEL & PINION 4.1:1 TR2-6	1	European models: TR5, TR6 to CP52867, North American models: TR250, TR6 to CC61570	CHF 539.85
26	502523	CROWNWHEEL&PINION TR2-6	1	European models: TR5, TR6 to CP52867, North American models: TR250, TR6 to CC61570	CHF 664.80
26	503924	CROWNWHEEL&PINION 4,55:1	1	European models: TR5, TR6 to CP52867, North American models: TR250, TR6 to CC61570	CHF 664.80
26	515709	CROWN WHEEL &PINION TR2-6. 4.875:1 NCA	1	European models: TR5, TR6 to CP52867, North American models: TR250, TR6 to CC61570	availability request (add quantity to basket, offer follows)
26	516398	CROWN WHEEL & PINION 3.45:1 TR5/6PI	1	TR6 From CP52868	CHF 524.00
26	502127	CROWN WHEEL & PINION 3.7:1 TR2-6	1	TR6 From CC61571	CHF 524.00
27	100846	SPACER, SOLID, BETWEEN PINION BEARINGS	1	TR5, TR250, TR6 to CP52867/CC61570	CHF 59.85
28	100562	SHIM 0.003"	a/r	TR5, TR250, TR6 to CP52867/CC61570	CHF 4.30
28	100563	SHIM 0.005"	a/r	TR5, TR250, TR6 to CP52867/CC61570	CHF 4.30
28	100564	SHIM 0.010"	a/r	TR5, TR250, TR6 to CP52867/CC61570	CHF 4.30
28	140793	SHIM 0.003"	a/r	TR5, TR250, TR6 to CP52867/CC61570	CHF 9.15
28	140792	SHIM 0.005"	a/r	TR5, TR250, TR6 to CP52867/CC61570	CHF 9.15
28	140791	SHIM 0.010"	a/r	TR5, TR250, TR6 to CP52867/CC61570	CHF 9.15
29	156903	SPACER BEARING CROWN WHEEL & PINION	1	TR6 from CP52868/CC61571	CHF 26.90
30	100897A	PINION BEARING, INNER	1		CHF 60.00
31	100965/3	SHIM, 0.003"	a/r		CHF 5.90
31	1009665	SHIM, 0.005"	a/r		CHF 2.10
31	100967/10	SHIM, 0.005"	a/r		CHF 5.50
32	516398SHIM	SHIM PINION HEAD	a/r		CHF 15.35
33	100422	BEARING, DIFFERENTIAL PINION, OUTER	1	original spec	CHF 143.30
33	100422TIM	BEARING, DIFFERENTIAL PINION, OUTER	1	alternative spec	CHF 67.05
34	140337	OIL SEAL DIFF NOSE	1		CHF 14.35
35	160275	PINION FLANGE IRS	1	all IRS models	CHF 179.20
36	2A7323	WASHER PLAIN	1	TR5, TR250, TR6 to CP52868/CC61571	CHF 8.40
37	112635	NUT SLOTTED 5/8 UNF	1	TR5, TR250, TR6 to CP52867/CC61570	CHF 24.20
38	EAW4321	WIRE TIE, BINDING, X14IN	1	TR5, TR250, TR6 to CP52867/CC61570	CHF 1.25
39	510618A	NUT NYLOCK SPECIAL	1	TR6 From CP52868/CC61571	CHF 5.25
40	UKC725	SHIELD DIFF PINION NUT	1	TR6 from CP52868/CC61571	availability request (add quantity to basket, offer follows)
41	302155	DIFFERENTIAL CARRIER UNIT TR34A NCA	1		availability request (add quantity to basket, offer follows)
42	118977A	LOCKWASHER 3/8"	10		CHF 1.55
43	110737	BOLT, RING GEAR TO CARRIER, 3/8"	10		CHF 2.15
44	110515	BEARING, DIFFERENTIAL CARRIER, HIGH QUALITY	2	'Timken'	CHF 167.00
44	110515Z	BEARING, DIFFERENTIAL CARRIER	2	alternative	CHF 50.65
45	100894/3	SHIM, DIFFERENTIAL CARRIER BEARING, 0.003"	a/r		CHF 4.60
45	100895/5	SHIM, DIFFERENTIAL CARRIER BEARING, 0.005"	a/r		CHF 2.10
45	100896/10	SHIM, DIFFERENTIAL CARRIER BEARING, 0.010"	a/r		CHF 2.10
46	113187	USE 153384	2	16 teeth, plain - fit in pairs, alternative to 153384
46	153384	DIFFERENTIAL SUN GEAR 16 TOOTH	2	16 teeth, with machined groove - fit in pairs, alternative to 113187	availability request (add quantity to basket, offer follows)
47	102801	THRUST WASHER DIFFERENTIAL, 0.048"	2		CHF 12.00
48	113188	GEAR, DIFFERENTIAL, PLANET, 10 TEETH, PLAIN	2	10 teeth, plain - fit in pairs, alternative to 153385	CHF 44.15
48	153385	USE 113188	2	10 teeth, with machined groove - fit in pairs, alternative to 113188
49	056793	USE 139951	a/r	0.046/0.049"
49	142165	USE 139951	a/r	0.049/0.051"
49	139951	THRUST WASHER, 0.051-0.053"	a/r	0.051/0.053"	CHF 16.80
49	142166	USE 139952	a/r	0.053/0.055"
49	139952	THRUST WASHER, 0.055-0.057"	a/r	0.055/0.057"	CHF 19.25
49	160373	THRUST DIFF PIN.058	a/r	0.057/0.059"	CHF 18.15
49	139953	THRUST WASHER, 0.059-0.061"	a/r	0.059/0.061"	CHF 19.25
49	160374	THRUST DIFF PIN.062	a/r	0.061/0.063"	CHF 18.55
49	139954	THRUST WASHER, 0.063-0.065"	a/r	0.063/0.065"	CHF 18.20
49	160375	THRUST DIFF PIN.066	a/r	0.065/0.067"	CHF 18.15
49	139955	THRUST WASHER, 0.067-0.069"	a/r	0.067/0.069"	CHF 16.80
49	160376	THRUST WASHER 0.070	a/r	0.069/0.071"	CHF 16.80
49	139956	THRUST WASHER, 0.071-0.073"	a/r	0.071/0.073"	CHF 16.80
50	100844	SHAFT, PINION GEAR	1		CHF 45.80
51	111215	LOCATING PIN DIFF	1		CHF 12.80
52	TT2220	LIMITED SLIP DIFFERENTIAL, QUAIFE TORQUE SENSING	1		CHF 1'800.00
52	TT2221	LIMITED SLIP DIFFERENTIAL, PLATE TYPE, IRS-AXLE	1		CHF 1'859.00
53	149378	AXLE SHAFT	1	uses nyloc nut	availability request (add quantity to basket, offer follows)
53	149379	USE 149379SR	1	uses nyloc nut
53	UKC4862	INNER AXLE SHAFT LH	1	alternative, uses castle nut	availability request (add quantity to basket, offer follows)
53	149379SR	AXLE SHAFT TR6 INNER RH	1	alternative, uses castle nut	availability request (add quantity to basket, offer follows)
54	134465	BEARING DIFF & OVERDRIVE	2		CHF 28.35
55	128638	HOUSING, AXLE SHAFT, OIL SEAL	2		CHF 32.15
56	138523	OIL SEAL, AXLE SHAFT, INNER	2		CHF 6.10
57	SH605061	SCREW 5/16" UNF X 3/4"	8		CHF 0.65
58	GHF332	WASHER SPRING 5/16	8		CHF 0.25
59	149409	DRIVE FLANGE	2		CHF 83.65
60	134450	STONEGUARD DRIVESHAFT, WELDED TO FLANGE	2		availability request (add quantity to basket, offer follows)
61	143280	KEY, INNER FLANGE TO INNER AXLE SHAFT	2		CHF 17.70
62	2A7323	WASHER PLAIN	2		CHF 8.40
63	138563	NUT NYLOC REAR HUB	2		CHF 40.10
64	21A79	NUT SLOTTED 5/8 UNF	2		CHF 8.10
65	GHF504	SPLITPIN 1/8 X 2IN	2		CHF 0.55
66	312061K	REBUILD KIT, DIFFERENTIAL	1	incl. 15, 30, 33, 34, 44, 54, 56	CHF 214.00
67	312061FK	REAR AXLE MOUNTING KIT	1	Includes rubber front mountings	CHF 103.00
67	SPK13AM	MOUNTING KIT, REAR AXLE, POLYURETHANE	1	Includes polyurethane front mountings	CHF 206.25
68	147783	MOUNTING REAR DIFF, RUBBER	2		CHF 32.25
	147783SPK	MOUNTING SET, DIFFERENTIAL, REAR, POLYURETHANE	1	Kit includes: 2 bushes, 2 tubes, 2 washers & 2 nuts	CHF 133.50
69	BH605111	BOLT 5/16UNFX1 3/8	4		CHF 2.45
70	WM58	WASHER, PLAIN, 5/16" ID X 3/4" OD	4		CHF 0.95
71	GHF272	NUT 5/16UNF NYLOC TN	4		CHF 1.85
72	134234	WASHER, SPECIAL, AXLE MOUNTING	4		CHF 5.65
73	GHF273	NUT 3/8 UNF NYLOC TN	4		CHF 1.05
74	134235	BUSH, DIFFERENTIAL MOUNTING, CONE, RUBBER	2		CHF 6.05
74	134235SPK	BUSH SET, DIFFERENTIAL MOUNTING, CONE, POLYURETHANE	1		CHF 83.10
75	134236	BUSH, DIFFERENTIAL MOUNTING, CUP, RUBBER	2		CHF 6.05
75	134236SPK	BUSH SET, DIFFERENTIAL MOUNTING, CUP, POLYURETHANE	1		CHF 70.60
76	134234	WASHER, SPECIAL, AXLE MOUNTING	4		CHF 5.65
77	GHF273	NUT 3/8 UNF NYLOC TN	4		CHF 1.05
78	140009K	REINFORCEMENT KIT, AXLE MOUNTING, FRONT	1	Includes reinforcements & mounting pin	CHF 99.95
79	147400	PIN DIFF MOUNTING REAR	1		CHF 24.85
80	147400RK	REINFORCMENT KIT REAR X MEMBER	2	Includes reinforcements & mounting pin	CHF 71.90
81	147400	PIN DIFF MOUNTING REAR	2		CHF 24.85